The Reflexion-4 Adjustable Base ® OWNER’S MANUAL The Reflextion®-4 base can be used in conjunction with both Sealy-Posturepedic and Optimum mattresses.
The Reflexion-4 Adjustable Base ® TA B L E O F C O N T E N T S 2 Safety Precautions 4 Parts List 6 Installation Guide 8 Using the Remote Control 10 Programming the Remote Control 11 Lowering the Bed in a Power Outage 12 Troubleshooting 14 Warranty Model Number: IC-ABF-A18-WWM-U-W 1
Safety Precautions ATTENTION! GROUNDING SAFETY I N - H O M E U S E O N LY IMPORTANT SAFETY INSTRUCTIONS. To reduce the risk of electric shock, electrical fire, or faulty operation of this product, your Adjustable Base features a polarized plug meant to be used only with a grounded electrical outlet. If this plug does not fit into your outlet, contact a qualified electrician to install a properly grounded outlet.
CONSUME R S W I T H PACE M AK E R S P R O D U C T R AT I N G S It is possible that the (optional) vibrating feature of this bed may be interpreted falsely by some pacemakers as movement and/or exercise. This is common with any product that produces a vibrating motion, and may or may not affect your pacemaker. Please consult your physician with any concerns.
Parts List Before discarding any packing materials, check the Adjustable Base carton and verify all items in the parts list are included. M AT T R E S S R E TA I N E R B R AC K E T (1) * R E M O T E CO N T R O L (1) I N N E R H E A D B OA R D B R AC K E T (2) * * B E D L E G (4) O U T E R H E A D B OA R D B R AC K E T (2) * * * Indicates part is attached to base for shipping purposes. ** These items are not included.
1 /4 I N C H R E TA I N E R WA S H E R (2) * R E TA I N E R B O LT (4) * A L L E N K E Y W R E N C H (1) 5/16 I N C H WA S H E R (12) * * H E A D B OA R D B R AC K E T B O LT (6) * * W R E N C H (1) * * 5/16 I N C H N U T (6) * * * Indicates part is attached to base for shipping purposes. ** These items are not included. These are optional HBD brackets and parts that can be purchased from your supplier or distributor.
Installation Guide STEP 1 STEP 3 For safety reasons, the following should be performed by 2 people. Carefully lift the bed frame unit out of the shipping carton with the top side facing downward. Remove and extend the power cord from the frame. If the bed does not work, refer to Troubleshooting on page 12. STEP 8 I M P O R TA N T! STEP 2: ASSEMBLE THE BED LEGS MAKE SURE POWER CORDS DO NOT OBSTRUCT ANY ADJUSTABLE BASE MECHANISMS.
I M P O R TA N T! FAILURE TO FOLLOW THE INSTALLATION STEPS AS THEY APPEAR IN THIS GUIDE COULD RESULT IN DAMAGE TO YOUR ADJUSTABLE BASE. MAKE SURE TO POSITION THE BOTTOM OF THE HEADBOARD CROSS MEMBER NO MORE THAN 3 INCHES (76.2 MM) BETWEEN THE HEADBOARD AND THE TOP OF THE MATTRESS.
Using the Remote Control A: Under Bed Light (on back of Remote) LED Signature Light B: Raises the Head of the Bed D: Raises the Foot of the Bed C: Lowers the Head of the Bed E: Lowers the Foot of the Bed UNDER BED LIGHT (A) Press the button to turn on or off the under bed light. (button on back of remote control) HEAD AND FOOT POSITION ADJUSTMENTS (B, C, D, E) Use to raise or lower the head and foot sections of your Adjustable Base.
The massage feature is programmed with an Auto Shut-Off Timer that will automatically turn off the massage after 15 minutes of continuous use. • It is not necessary to face the receiver to operate the remote control. Remote signal is best transmitted within 9 feet (3 meters) of the receiver. STOP BUTTON (M) SAFETY Hold down for 2 seconds to stop massage. • In the case that an overload of weight is placed on the head or foot mechanism, the control unit will automatically stop all functions.
Programming the Remote Control NOTE: Programming by the user is only needed on replacement remotes. STEP 1 Insert batteries into the remote control (2 x AA batteries). Follow steps 1 through 6 below to use the remote control with 1 power base. To use the remote control with 2 power bases, repeat the steps for the second power base using the same remote. STEP 4 STEP 6 The LED signature light will illuminate. This means the RF frequency code setting function has been activated.
Lowering the Bed in a Power Outage Your Adjustable Base is equipped with an emergency lowering feature. Follow the steps below in the event that your base is in the raised position during a power outage. STEP 1 STEP 3 Locate and remove the 9 volt battery cover. Replace the battery cover. STEP 2 STEP 4 Install 2 alkaline 9 volt batteries (not included). Press either the “Flat” button (F) or the individual lowering buttons (C, E) to lower your bed to the level position.
Troubleshooting In the event the Adjustable Base fails to operate, investigate the problems and possible solutions provided below. REMOTE CONTROL LED I L L U M I N AT E S A N D A P P E A R S NORMAL, BUT WILL NOT O P E R AT E B E D 1 Is the power cord plugged into a working and grounded electrical outlet? REMOTE CONTROL FUNCTION K E Y S W I L L N O T I L L U M I N AT E 1 Replace batteries in the remote control. 2 Check that batteries are installed properly.
IF YOU EXPERIENCE ANY TROUBLE WITH YOUR ADJUSTABLE BASE WITHIN THE WARRANTY PERIOD, PLEASE CONSULT THE TROUBLESHOOTING GUIDE PROVIDED WITH YOUR FRAME AND ONLINE (IF APPLICABLE). IF PROBLEMS PERSIST, PLEASE CALL. CUSTOMER SERVICE TOLL FREE NUMBER: 1‑800‑499‑1965 Please have your receipt ready and available.
Warranty ADJUSTABLE BASE: 20‑YEAR LIMITED WARRANTY YEARS 2 AND 3: FULL COVERAGE O F P A R T S O N LY THIS WARRANTY. Upon notice during the years two and three (2–3) from the warranty commencement date, Sealy will offer replacement parts for any defective part to the purchaser. Electronics, electrical components, drive motors and massage motors are included.
The decision to repair or to replace defective parts under this warranty shall be made, or case to be made, by Sealy at its option and in its sole discretion. REPAIR OR REPLACEMENT SHALL BE THE SOLE REMEDY OF THE PURCHASER. THERE SHALL BE NO LIABILITY ON THE PART OF SEALY FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR FOR ANY OTHER DAMAGE, CLAIM, OR LOSS NOT EXPRESSLY COVERED BY THE TERMS OF THIS WARRANTY.
Warranty (continued) e Any proceedings to resolve or litigate any dispute in any forum will be conducted solely on an individual basis. Neither You nor Sealy will seek to have any dispute heard as a class action, private attorney general action, or in any other proceeding in which either party acts or proposes to act in a representative capacity. No arbitration or proceeding will be combined with another without the prior written consent of all parties to all affected arbitrations or proceedings.
IF YOU EXPERIENCE ANY TROUBLE WITH YOUR ADJUSTABLE BASE WITHIN THE WARRANTY PERIOD, PLEASE CONSULT THE TROUBLESHOOTING GUIDE PROVIDED WITH YOUR FRAME AND ONLINE (IF APPLICABLE). IF PROBLEMS PERSIST, PLEASE CALL. CUSTOMER SERVICE TOLL FREE NUMBER: 1‑800‑499‑1965 Please have your receipt ready and available. THANK YOU AND ENJOY YOUR ADJUSTABLE BASE! Model Number: 609663 Serial Number: ________________________________ (Place your serial number here for ready reference.