Typewriter User Manual

I
Text/'l;hrase/'l_'o_nat ?
STORE I
t
y Y
|TORE _I_T_,N
+
0 MARGIN/TABSET 472
v v
sI_RE R£'_
set margln/tab ,,._
I 472
V Y
STORE I_._ET_q.N
enter text
I CLOSING FILE
Y
STORE
I
Y/N?
I
v
ltBTUAN
I 472
Y
NP
i,
l
I
3)
"Text/Phrase/Format?" appears On the LCD, .'T, "P" and
"F" will flash.
4) Press the "T" (TEXT) Key.
The paper is fed one line and the Carrier retums to the
left margin. The LCD is cleared and the counter indicating
the number of spaces to the right margin appears. The
LAutomatic return is automatically activated.
• Margin and tab settings, as well as other functions which
were in effect before entering the STORE mode, are
automatically canceled to be stored in the back-up mem-
ory. They are automatically recalled when you exit the
STORE mode.
5)
6)
Hold down the Code Key and press the "F" Key. "O
MARGIN/TAB SET" appears.
Set the left and right margins and tabs, as you would in
the NP mode. Clear any unnecessary tabs.
7) Hold down the Code Key and press the "F" Key again.
"_ MARGIN/TAB SET" disappears. The Carder returns to
the newly set left margin.
8)
®
g)
10)
Enter text_ Entered text is displayed on the LCD and
pdnted one line at a time when you type a normal hyphen
or space in the automatic carder return zone.
Make corrections on the LCD before the line is printed.
Once text is printed on paper, it cannot be corrected: To
make corrections after text has been printed, first close
the file and edit it on the LCD, as described in section 3,
"File Editing".
Press the Mode Key to terminate the STORE mode.
"CLOSING FILE Y/N?" appears on the LCD.
Press the "Y" Key to close the file and return to the Nor-
mal Print (NP) mode.
O Press the "N" Key to return to the Text storing mode.
31