Typewriter User Manual

5, HOW TOCHANGE PRINTWHEEL

1. Removing Printwheel

1) Turn off the machine. Open the Top Cover and remove

the Ribbon Cassette as explained under "Removing Rib-

bon Cassette".

2) Pull the Printwheel Set/Release Lever towards you.

3) Lightly grasp the top of the Printwheel and carefully pull

it up towards you.

Print Head

_ _Card Holder

2. Installing Print_eel

1) Ughtly grasp the edge of the Pdntwheel and carefully

lower itin between the Card Holder and the PMntHead.

Q Make sure that the typeface (the side with typing style

indicated) faces the Platen.

2) Press the Printwheel Set/Release Lever away from you

until it snaps into place, locking the Mechanism.

• Press the Lever as far as it goes again to make sure the

Printwheel has been locked into place.

3) Replace the Ribbon Cassette and close the Top Cover.

• Remount the Printwheel if any abnormal noise is heard or

if incorrect characters are printed.