Chainsaw User Manual
Table Of Contents
- 10855 Bc-Fc.ai
- 10855 2-3.ai
- 10855 4-5.ai
- 10855 6-7.ai
- 10855 8-9.ai
- 10855 10-11.ai
- 10855 12-13.ai
- 10855 14-15.ai
- 10855 16-17.ai
- 10855 18-19.ai
- 10855 20-21.ai
- 10855 22-23.ai
- 10855 24-25.ai
- 10855 26-27.ai
- 10855 28-Fc.ai
- 10855 30-31.ai
- 10855 32-33.ai
- 10855 34-35.ai
- 10855 36-37.ai
- 10855 38-39.ai
- 10855 40-41.ai
- 10855 42-43.ai
- 10855 44-45.ai
- 10855 46-47.ai
- 10855 48-49.ai
- 10855 50-51.ai
- 10855 52-53.ai
- 10855 54-55.ai
REV 10855
2-12-08
26
If the blade does not follow a straight line:
• Teeth are dull. This is caused by hitting a hard object such as a nail, dulling
teeth on one side. The blade tends to cut to the side with the sharpest teeth.
• Base is out of line or bent.
• Blade is bent.
• Edge guide or straight edge is not being used.
If the blade binds or smokes from friction:
• Blade is dull.
• Blade is on backwards.
• Blade is bent.
• Workpiece is not properly supported.
• Incorrect blade is being used.
TROUBLESHOOTING
Sears and other Craftsman outlets have a large selection of 7
1
/4-inch Craftsman
steel carbide-tipped blades designed for specific cutting applications.
Contractor bulk packs are also available.
Sears and other Craftsman outlets also offer sawhorses, combination and
framing squares, straight edges, edge guides, and a large assortment of
clamps to help you with all your sawing needs.
Visit your local Sears store or other Craftsman outlets or shop sears.com/craftsman.
ACCESSORIES
WARNING:
The use of attachments or accessories that are not
recommended for this tool might be dangerous and could result in serious injury.
!
27
NOTES