Power Inverter Owner's Manual

ManualsBrandsSears ManualsPower Supply200.71522

00-99-000859/0808

OPERATOR’S MANUAL

Power Inverter 140

Converts 12V DC Power to 110V AC

Household Electrical Power + USB (5V)

CAUTION:

Read all Safety Rules and Operating Instructions,

and follow them with each use of this product.

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

Model No.

200.71522

Summary of content (8 pages)

PAGE 1
OPERATOR’S MANUAL ® Power Inverter 140 Converts 12V DC Power to 110V AC Household Electrical Power + USB (5V) Model No. 200.71522 CAUTION: Read all Safety Rules and Operating Instructions, and follow them with each use of this product. Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
PAGE 2
Table of Contents SECTION Page 1. IMPORTANT SAFETY INSTRUCTIONS 1 2. product features 2 3. before using 2 4. operating instructions 3 5. LED indicator and overload protection 3 6. power source 3 7. usage examples 4 8. specifications 4 9. replacement parts 4 10.
PAGE 3
important: read and save this safety and instruction manual. 1. important safety instructions Before using your Power Inverter 140, read and understand this Owner’s Manual. 1.1 Keep the inverter well ventilated in order to properly disperse heat generated while it is in use. Make sure that there are several inches of clearance around the top and sides and do not block the slots of the inverter. 1.2 Make sure the inverter is not close to any potential source of flammable fumes, gases or clothing. 1.
PAGE 4
2. power inverter 140 product features 5 2 1 1. Green LED Indicator 2. One, 3-prong AC Outlet 3. Positive Connector 4. Two, Negative Connectors 6 5. USB Port 6. Fuse (inside of unit) 4 4 3 3. before using power inverter 140 It is important to know the continuous wattage of the device you plan to use with the inverter. The Power Inverter 140 must be used with devices drawing 140 watts or less. If the wattage is not marked on the device, limit usage of AC devices to those that draw 1A AC or less.
PAGE 5
4. 4.1 operating instructions Insert inverter into 12V accessory outlet: • Push the Power Inverter 140 firmly into a vehicle’s or portable power unit’s 12V accessory outlet. The LED indicator light should glow GREEN verifying the inverter is receiving power. If the LED indicator is not on, check the connection and fuses. 4.2 Connecting and using the AC or USB device: • Make sure that the device to be operated is turned OFF. • Plug the device into the Power Inverter AC outlet or USB port.
PAGE 6
7. usage examples Device Type Estimated Power Cell Phones, MP3 Players 10 Watts Portable CD Players 50 Watts Laptop Computers 90 Watts Video Games 100 Watts 8. specifications Maximum Continuous Power 140 Watts Surge Capacity (Peak Power) 280 Watts No Load Current Draw <0.2 Amps Wave Form Modified Sine Wave Input Voltage Range 10.5 – 15.5V DC Low Battery Alarm N/A Output Voltage 110 – 125V AC Low Battery Shutdown 9.9V – 10.8V DC High Battery Shutdown 15.0V – 16.
PAGE 7
10. troubleshooting Problem: low or no output voltage REASON SOLUTION Poor contact at terminal Unplug and reinsert Power Inverter 140. Equipment being operated is drawing too much power Use a higher capacity inverter or do not use the device. Inverter is too hot (thermal shut down) Allow inverter to cool. Check for adequate ventilation. Reduce the load on the inverter to rated continuous power output.
PAGE 8
•6•