User's Manual

ManualsBrandsSears Manualsclothes dryerSears 3397630

COIN-OPERATED

COMMERCIAL

ELECTRICDRYER

OWNER'S MANUAL

and

INSTALLATION

INSTRUCTIONS

SEARS,ROEBUCKANDCO.

HoffmanEstates,IL 60179

www.sears.com

TABLE OF CONTENTS

Dryer Safety ............................................................ 2

Installation Instructions ......................................... 3

Electrical requirements ........................................ 3

Exhaust requirements .......................................... 9

Recessed area/closet installation ...................... 11

Mobile home exhaust requirements ................... 11

Installing the dryer ............................................. 12

Operating the dryer .............................................. 16

Troubleshooting .................................................... 17

Service and Assistance ....................................... 20

For Sears warranty information or to contact a Sears Service

Center, call 1-800-4-MY HOME S_(1-800-469-4663).

IMPORTANT: Read and follow all safety, installation, and

operating instructions before first use of this product.

If you need SERVICE or PARTS for your

Kenmore coin-operated dryer:

When requesting service, be ready to give the model

number, serial number (located on a tag in the door well

behind the door) and date of purchase. Record below.

Model No

Serial No.

Date of Purchase

Record Coin Box

Key Number

Key number is on key and/or coin box.

3397630

PRINTEDJNTHE U S A 4/99

Summary of content (20 pages)

PAGE 1
TABLE OF CONTENTS Dryer Safety ............................................................ 2 Installation Instructions ......................................... 3 Electrical requirements ........................................ 3 Exhaust requirements .......................................... 9 Recessed area/closet installation ...................... 11 COIN-OPERATED COMMERCIAL ELECTRICDRYER Mobile home exhaust requirements ................... 11 Installing the dryer .............................
PAGE 2
DRYER SAFETY YOUR SAFETY AND THE SAFETY OF OTHERS IS VERY IMPORTANT. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to hazards that can kill or hurt you and others. All safety messages will be preceded by the safety alert symbol and the word "DANGER" or "WARNING". These words mean: You wil__l be killed or seriously injured if you don't follow instructions.
PAGE 3
INSTALLATION INSTRUCTIONS Three-Wire Receptacle Electrical Connection to Read the "Dryer Safety" section of this Owner's Manual and completely read these Installation Instructions before beginning installation. IMPORTANT: Observe all governing codes and ordinances. • The dryer must not be installed where it can be exposed to water and/or weather. • Check code requirements. Some codes limit or do not permit installation of clothes dryers in garages, closets, mobile homes, or sleeping quarters.
PAGE 4
GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. The power supply cord must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. WARNING: Improper connection of the equipmentgrounding conductor can result in a risk of electric shock.
PAGE 5
Thedryercanbeconnected directlyto fuseddisconnect orcircuitbreakerboxwiththree-wire, flexiblearmoredor non-metallic sheathed coppercable(withgrounding wire). All current-carrying wiresmustbeinsulated. A conduitconnectormustbeinstalledatjunctionbox. Allowfourfeetof slackinthelinesodryercanbemoved ifservicingisevernecessary. 4. Loosen or remove terminal block screws. Connect the neutral wire (white or center) of direct wire cable under the center screw of the terminal block.
PAGE 6
Alternate Connection: Four-Wire If local codes do not permit the connection of a framegrounding conductor to the neutral wire: Electrical Connection to Receptacle 1. Disconnect power. 2. Make sure the power supply cord or direct wire cable is in place. 3. Remove the neutral grounding wire (green/yellow wire) from external grounding connector screw. Loosen or remove terminal block screws.
PAGE 7
Localcodesmaypermitthe useofa U.L.-listed, 120/240-volt minimum,30ampere,dryerpowersupply cordkit(pigtail).PowersupplycordshouldbetypeSRD or SRDTandbeat leastfourfeetlong.Thewiresthat connecttothe dryermustendwithringterminalsor spadeterminalswithturnedends. 4. Remove the center terminal block screw. Remove the neutral grounding wire (green/yellow wire) from external grounding screw.
PAGE 8
Four-Wire Electrical Direct Wire) Connection Fire Hazard 1. Disconnect power. • Strip 5 inches of outer covering from end of cable. Leave bare grounding wire at 5 inches. • Cut 1 inch from 3 remaining insulated wires. Strip insulation back 1 inch. Shape the end of each wire into a "U" shaped hook. Use 10 gauge solid copper wire. Use a UL approved strain relief. Disconnect power before making electrical connections. Connect neutral wire (white or center wire) to center terminal (silver).
PAGE 9
5.Connectneutralgrounding wireandtheneutralwire (whiteor center)of directwirecableunderthecenter screwofterminalblock. Center silver-colored terminal block screw Externalground connector II Neutral wire (white) / dL II The dryer must be properly installed and vented to achieve maximum drying efficiency. Install the dryer in a well-ventilated room where the temperature is always above 45°R Also make sure that the dryer is leveled.
PAGE 10
Useducttapeto sealalljoints.Donotusescrewsto securevent.Lintmaycatchonscrews. Determining vent length The maximum length of the exhaust system depends upon: • The type of vent (heavy or flexible metal). • The number of elbows (90 ° turns) used. Use4-inchdiameterheavymetalorflexiblemetalvent. Donotkinkor crushflexiblemetalvent.It mustbefully extendedto allowadequateexhaustairto flow.Check ventafterinstallation. Theexhaustventcanberoutedup,down,left,right,or straightoutthebackofthe dryer.
PAGE 11
Multiple dryer exhausting guide Many multiple-family dwellings are furnished with provisions in the building for washing and drying laundry with automatic washers and dryers. The exhausting of the individual clothes dryers can be accomplished with a central exhaust vent system. The following is a list of factors for possible consideration in the design of a central vent system for this type of installation.
PAGE 12
NOTES: * Do not move dryer by grasping console. * Rough handling or moving dryer over rough floor can result in damage to leveling feet. * Slide dryer onto cardboard or hardboard before moving across floor. 1. Open dryer and remove any shipping tape that secures the dryer drum. Remove all parts, packages, and leveling feet. Explosion Hazard Keep flammable materials and vapors, such as gasoline, away from dryer. Place dryer at least 18 inches (46 cm) above the floor for a garage installation. 2.
PAGE 13
Installing coin-slide mechanism NOTE: If the coin-slide mechanism is installed, skip this step and proceed to coin-box adjustment. Remove the service door from the meter case by unlocking the service lock with the key shipped with the dryer. Starting the dryer without mechanism using the coin 1. Close the dryer door. 2. Push the PUSH TO START button firmly. Carefully insert coin-slide mechanism into opening and guide into holes. Secure the coin slide with bolt from inside the meter case.
PAGE 14
Replacing nylon timing cams on accumulator mechanism Changing Vend Price Follow all instructions carefully. NOTE: Place all screws and other items removed from coin slide assembly on a cloth so they will not get lost. Electrical Shock Hazard Disconnect power before servicing. Replace all panels before operating, Failure to do so can result in death or electrical shock. Electrical Shock Hazard Disconnect power before servicing. Replace all panels before operating.
PAGE 15
9. Set new vend price by adding or removing the appropriate block-out keys and/or dime inserts according to Table of Vend Prices. Opening dryer top TABLE OF VEND PRICE VENO PRICm COIN BLOTB IRa4nSTn o IIIIIIII lo¢u1111111 25¢11DIIIII 35¢DIDIIIII 5o¢IIDDIIII 8o¢ DIDDIIII 75¢IIDDDIII 85¢ DIDDDIII =I.oo IIDDDDII =1.1o =1.25 =1.35 =1.5o • 1.so =1.75 ulDDDDII IDDDDDII DIDDDDDI IDDDDDDI uDDDDDDI IDDDDDDD =I.a5 uDDDDDDD Electrical Shock Hazard Disconnect power before servicing.
PAGE 16
To close dryer top: 1. Push down on top until front locks catch. 2. Relock security top lock with key. 3. Replace screws under lint lid. 4. Replace tee spacer and nut on stud inside meter case. 5. Replace timer and bracket in meter case. Tighten mounting screws. 6. Replace and lock timer access door. 7. Plug in dryer or reconnect dryer. OPERATING THE DRYER Read operating instructions before operating the dryer. (Located on console.) 1. Dryer will not operate with the door open. 2.
PAGE 17
TROUBLESHOOTING Before servicing the dryer, always check out the machine to substantiate the complaint for which the service call was created. In many cases, it may just be a customer-instruct problem. Will not run • Power supply Check line fuses and line switches. • Main wiring harness Check for loose or broken terminal. • Door switch Make continuity check on switch contacts. • Main motor Check motor. • Timer Make continuity check on timer contacts Y to BG.
PAGE 18
Troubleshooting (cont.) Drying temperature too high • Operating thermostat Check for lint that may insulate thermostat from exhaust air. Check thermostat for function. Motor runs with door open • Door switch Check door switch for function and switch clip actuating arm for proper switch plunger actuation. If you need an additional parts list, contact your nearest Sears Service Center or Parts Department. Make sure to order by complete Model Number when ordering.
PAGE 19
PAGE 20
For major brand repair service: Call 24 hours a day, 7 days a week 1-800-4-MY-HOM EsM (1-800-469-4663) Para pedir servicio de reparacibn a domicilio For the repair or replacement - 1-800-676-5811 parts you need: Call 6 a.m. - 11 p.m.