Owner`s manual

SECTION 2. PREPARE YOUR MACHINE FOR SEWING
Prepare the Bobbin
To Remove the Bobbin Case from the Machine
Remove the extension table from
the machine by pulling it to the
left. Open the shuttle cover by
pulling down the embossed part on
the left side of the cover.
Raise needle to its highest positron
by rotating hand wheel toward you.
%............. J
To remove bobbin case from shut-
tle, pul! open latch of bobbin case,
Pu|l bobbin case straight out of
shuttle,
Wind the Bobbin
Release clutch by turmng the
clutch knob inside the hand wheel
toward you to stop the needle from
moving while you winding the
bobbin.