Owner`s manual

14F60 TREADMILL
DOT MATRIX CENTER DISPLAY
Twenty columns of dots (8 high) indicate each segment of
a workout. The dots are only to show an approximate level
(speed/incline) of eort. They do not necessarily indicate a
specic value - only an approximate percent to compare levels
of intensity. In operation, the speed/incline dot matrix window
will build a prole “picture” as values are changed during a
workout. When the word “Speed” is lit above the dot matrix it
indicates that the Speed prole is being displayed and when
the word “Incline” is lit above the dot matrix it indicates the
Incline prole is being displayed.
You may change the Dot Matrix prole view between Speed and Incline by pressing the Enter
button. After pressing Enter to view the two proles, pressing it a third time will
automatically alternate the Speed and Incline displays, showing each one for ve seconds.
1/4 MILE TRACK
The 1/4 mile track is displayed around the dot matrix window. The ashing dot indicates your
progress. The number of laps you complete are accumulated in the lap counter, which is below
the Message Window.
CALORIE DISPLAY
Displays the cumulative calories burned at any given time during your workout.
Note: This is only a rough guide used for comparison of dierent exercise sessions, which cannot be
used for medical purposes.
There is an Audio Input Jack ( ) on the front of the console and built-in speakers. You may
plug any low-level audio source signal into this port. Audio sources include MP3, iPod, portable
radio, CD player or even a TV or computer audio signal. There is an audio patch cable included
to and also a headphone jack ( ) for private listening.
MESSAGE WINDOW DISPLAY
The Message Window will initially display Program Name. Each time the Display button is
pressed the next set of information will appear. The order of information displayed will be: Pace,
Incline, Laps, Verticle, Segment Time, Max Speed (in mph), and Data Scan mode. In Data
Scan mode, the displayed information will change every 4 seconds in the Message Window.