User manual

For example, enter a sequence that
will start your VCR recording your
DSS Satellite channel.
SAT + POWER + SAT + 2 + 7 + 5 +
VCR + POWER + VCR + RECORD.
This sequence will turn on the DSS,
change the channel to 275, turn on
the VCR and start the VCR record-
ing.
Note: When setting up your se-
quence, you will need to include any
keystrokes that would normally be
required during regular usage, such
as pressing ENTER after entering a
channel number when changing
channels.
5 Once the sequence has been set
up, press the ESC key to return to
the [DEVICE and the TIME] display
screen. Below the [TIME], a
CLOCK ( ) symbol will appear to
show that there is a timed sequence
in the memory.
Note: If, at any time during the set up of your timed
sequence, a mistake is made, press the ESC key to
return to the main display [DEVICE and the TIME] .
Now, delete the sequence that was incorrect and
restart your timed sequence.
After you have set up a timed sequence, you may
want to set up a second sequence that turns
everything off after your initial sequence is complete.
For the example above, after recording the program
from your DSS, you can set up a second sequence
to power OFF your DSS and VCR. Repeat Steps
1 - 5 to set up a sequence to power OFF your
components.
To Delete a Timed Sequence
1 Press and hold MAGIC until the
display screen changes from
[DEVICE and the TIME] to
[TIMED SEQ]. Press SELECT. The
display will change to [ADD MACRO].
Press MENU - one time. The
display will change to [DEL MACRO].
Press SELECT.
2 The display will then change to
[DEL (the DAY) and (the TIME)]. If
this is the timed sequence you
would like to delete, press SELECT.
The display will change to
[DELETED] then return to
[DEVICE and the TIME].
Note: If you have more than one timed sequence
saved in the memory of the A/V Producer, use the
MENU - key to scroll through your saved timed
sequences until you see the sequence you would
like to delete. Once the sequence is displayed on
the screen, press SELECT . The display will change
to [DELETED] then return to the next available
sequence to be deleted. If there are no other
sequences to be deleted, then the display will return
to [DEVICE and the TIME].
M
A
G
I
C
S
E
L
E
C
T
MENU-
S
E
L
E
C
T
S
E
L
E
C
T
E
S
C