® Model No. 831.105021 Serial No. USER'S MANUAL Write the serial number in the space above for reference. The serial number decal is found on the frame behind the access cover. To schedule repair service or to purchase parts call SEARS toll-free at: 1-800-4-MY-HOME ® (1-800-469-4663) 24 hours a day 7 days week To purchase or inquire about a Sears Maintenance Agreement call SEARS toll-free at: 1-800-361-6665 CAUTION Read all precautions and instructions in this manual before using this equipment.
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 CHOOSING A LOCATION FOR THE HYDROTHERAPY SPA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 SET-UP AND ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT SAFETY INSTRUCTIONS WARNING: TO REDUCE THE RISK OF DROWNING, ELECTRIC SHOCK, OR SERIOUS INJURY, READ THE FOLLOWING IMPORTANT PRECAUTIONS BEFORE USING THE HYDROTHERAPY SPA. READ AND FOLLOW ALL INSTRUCTIONS 1. It is the responsibility of the owner to ensure that all users of the hydrotherapy spa are adequately informed of all precautions. 9. Do not bring any object into the hydrotherapy spa that could damage the spa shell. 10. Never insert any object into any opening. 2.
Do not use the spa until the GFCI has been repaired or replaced by a qualified electrician. temperature to 100°F (38°C) or below. Lower temperatures are also recommended for children. Children should not be allowed to swim under the surface of the water in the spa. 20. Keep all electrical appliances such as radios, telephones, televisions, and lights at least five feet (1.5 m) away from the water. 26.
33. WARNING—To reduce the risk of injury: It is especially important for persons over the age of 35 or persons with pre-existing health problems, such as obesity, heart disease, high or low blood pressure, circulatory problems, or diabetes to consult their physician before using this product. 34. WARNING—The included warning sign must be posted where all users of the spa can see and read it (see POSTING THE WARNING SIGN on page 13). 35.
BEFORE YOU BEGIN Thank you for selecting the innovative IMAGE® RENEW 510 hydrotherapy spa. The RENEW 510 offers the features and quality of a traditional hot tub at an affordable price. Best of all, the RENEW 510 provides the benefits of hydrotherapy in the comfort and privacy of your own home. For your safety and benefit, read this manual carefully before using the RENEW 510.
CHOOSING A LOCATION FOR THE HYDROTHERAPY SPA There are many factors to consider when choosing a location to set up the hydrotherapy spa. These factors vary depending on whether you use the hydrotherapy spa inside or outside. We have listed several factors you may wish to consider as you decide where you want to use the hydrotherapy spa. If you set up the hydrotherapy spa inside: If you set up the hydrotherapy spa outside: 1. The hydrotherapy spa will increase the level of humidity in your home.
SET-UP AND ASSEMBLY Before beginning assembly, carefully read the following information and instructions: • During assembly, make sure that all parts are oriented as shown in the drawings. • Place all parts in a cleared area and remove the packing materials from the spa shell; do not dispose of the packing materials until assembly is completed and the spa is in operation. • Read each assembly step before you begin. • Assembly requires two people.
3. Remove the two warning decals (not shown) from the spa shell. Wipe out the spa shell using a damp cloth. Before you fill the spa, make sure that it is in the desired position and that it can easily be serviced. Once the spa is filled with water, it must be drained before it can be moved. 3 Fill to Here Using a garden hose or other clean water source, begin filling the spa. Do not use soft water.
USING THE HYDROTHERAPY SPA The hydrotherapy spa is designed to seat two adults. The ten thera-jets can be regulated to provide a relaxing massage to sooth away stress, and the strength of the water massage can be adjusted by the air control. The hydrotherapy spa holds 200 gallons (167 imperial gallons) of water and offers an automatic, programmable heating (70°F to 104°F [21°C to 40°C]) and filtration system.
SPA SHELL DIAGRAM G A C A B E F D A A B B SPA OPERATION The filter (C) can be removed for cleaning and replacement (see page 17). Refer to the diagram above. The function of each component is explained below: The suction vent (D), located near the floor of the spa, brings the water into the pump, in order to operate the system. The suction cover should always be in place over the suction vent. Never operate the spa without the suction cover in place.
CONSOLE DIAGRAM Jet Light Button Button Temperature Buttons Refer to the diagram above. The function of each control is explained below: Jet Button: Turns the spa jets on and off. If the button is pressed once, the spa jets will run at low speed, providing gentle hydrotherapy. If the button is pressed again, the jets will run at high speed, providing more intense hydrotherapy. If the button is pressed a third time, the jets will shut off.
SECURING THE SPA COVER ATTACHING THE RED AND BLUE LIGHT COVERS To secure the spa cover, snap the latches on the spa cover into the buckles on the side panels. The spa comes with red and blue light covers for the spa light. To attach one of the light covers, center it over the spa light and press it into place. To lock the buckles, insert the key and turn it clockwise 1/4 turn. To unlock the buckles, insert the key and turn it counterclockwise 1/4 turn.
MAINTENANCE The hydrotherapy spa is designed to provide you with years of enjoyment. Please follow the guidelines below to properly maintain the spa. MAINTAINING THE SPA COVER The spa cover should be cleaned monthly. To clean the spa cover, use water and a non-abrasive cleaner on the entire cover. Rinse the cover with a garden hose to remove any cleaner residue. Dry the cover entirely. You should also use a non-silicone based vinyl conditioner on the cover after you clean it.
Additional chemicals can be purchased at a pool and spa supply store. ATTACHING AND REMOVING THE ACCESS COVER To locate the access cover, refer to the drawing on page 6. Turn off the power to the spa. To remove the access cover, first remove the four access cover screws. Slide the access cover down and then pull the bottom of it away from the spa. Be careful not to damage the spa shell as you remove the cover.
DRAINING THE HYDROTHERAPY SPA DRAINING THE PUMP The hydrotherapy spa should be drained at least four times a year and refilled with clean water. You may need to drain the spa more often, depending on the user load. This must be done, because after repeated chemical treatment, the water becomes chemically saturated. Once this happens, additional chemical treatment of the water is no longer effective. The spa should also be drained if you will not be using it for long periods of time.
WINTER USE AND CARE 3. Reach into the basket with four fingers and pull the basket towards you until it snaps free. 4. Lift the basket out of the filter housing by pulling on the handle on the far side and turning the basket towards you. 5. Clean the basket by spraying it with a garden hose or holding it under a faucet. Note: Avoid hitting the basket against objects to clean it, since this may break the basket. 6. Put the basket back into the housing and press it down until it snaps into place. 7.
TROUBLE-SHOOTING Most problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our Customer Service Department toll-free at SEARS 1-800-4MYHOME (469-4663), or SEARS 1-877-LEFOYER (533-6937), 24 hours a day. 1. SYMPTOM: THE SPA WILL NOT OPERATE 6. SYMPTOM: THE WATER DOES NOT HEAT a. Check to see if the GFCI breaker is tripped, or was not turned on. Reset the GFCI breaker. a.
8. SYMPTOM: THE WATER PULSATES OR THERE IS MINIMUM WATER FLOW 10. SYMPTOM: THE SPA CONTINUES TO RUN AFTER IT HAS BEEN SHUT OFF a. Adjust the water level. This usually occurs only when the water level is low. Add water until the thera-jets are covered (see step 4 on page 9). a. To turn the spa jets on, press the Pump button once. To turn the spa jets off, press the control twice. After you press it once, the spa jets will shut off for about 30 seconds, and restart. Press the control again.
PART LIST—Model No. 831.105021 Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 8 4 4 4 4 1 1 2 2 2 1 4 1 1 1 2 1 1 1 3 1 1 10 1 2 Description R1200A Key No. Qty.
EXPLODED DRAWING—Model No. 831.
NOTES 22
NOTES 23
ORDERING REPLACEMENT PARTS To order replacement parts, simply call our Customer Service Department toll-free at SEARS 1-800-4MYHOME (469-4663), or SEARS 1-877-LEFOYER (533-6937) 24 hours a day. To help us assist you, please be prepared to give the following information when calling: • The MODEL NUMBER of the product (831.