EXPANSE 0ooo 0-I0 _H o 2.0HP• PROGRAMMABLE SPEED/INCUNE Model No. 831.297452 Serial No. The serial number can be found in the location shown below. Write the serial number in the space above. F[O|l| FO x U E: R I P C i _ E: Ivl F__ N Ill Be| T _ I HF---LPLINE! 1-800-736-6879 _ILCAUTION!: Reed all precautions end Instructions In this manual before using this equlpmenL Keep this manual In e safe place for future reference. OWNER'S MANUAL SEARS, ROEBUCK AND CO.
FULL 90 DAY WARRANTY For 90 days from the date of pumhase, when proper assembly and maintenance procedures detailed in the owner's manual are followed, SEARS will, free of charge, repair or replace and install a replacement part for any defective part, when this treadmill is used in a normal manner. This warranty does not apply when this treadmill is used for commercial or rentai purposes. SERVICE IS AVAILABLE SIMPLY BY CONTACTING TER/DEPARTMENT IN THE UNITED STATES.
EXPAN SE 00 0-10MPHo 2.0HP, PROGRAMMABLE SPEED/INCUNE TABLE OF CONTENTS IMPORTANT PRECAUTIONS ................................................................. BEFORE YOU BEGIN ........................................................................ ASSEMBLY ................................................................................ OPERATION AND ADJUSTMENT ............................................................. TROUBLE-SHOOTING AND STORAGE .................................................
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock or injury to persons, read the following Important precautions and Information before operating the treadmill. 1. Position the treadmill on a level surface, with at least 8 feet of clearance behind the treadmill. Do not place the treadmill near water, outdoors or on any surface that blocks an air opening. Do not operate where aerosol products are used or where oxygen Is being administered. 2.
BEFORE YOU BEGIN Thank you for selecting the SEARS LIFESTYLEPP EXPANSE 1000 treadmill. The EXPANSE 1000 treadmill blends advanced technology with innovative design to let you enjoy an excellent form of cardiovascular exemlee in the convenience and pdvacy of your home. until 7 p.m. Central Time (excluding holidays). To help us assist you, please note the product model number and serial number before calling. The model number of the treadmill is 831.297452.
ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing matedals until assembly is completed. THE FOLLOWING TOOLS ARE REQUIRED FOR ASSEMBLY: The Included 7/32" allen wrench and your own adjustable wrench _:;;;:=:::::::_. 1. Insert the square end of one of the Upright Bushings (98) into the square hole in the right side of the treadmill Frame (45).
OPERATION MAINTENANCE-FREE AND ADJUSTMENT WALKING BELT Your treadmill features a maintenance-free walking belt coated with PERFORMANT LUBE TM, a highperformance lubdcant. Dudng the first few hours of use, it is normal for a small amount of white powder to appear on the foot rails andthe walking platform. The white powder is high-performance lubricant from the walking belt.
DIAGRAM OF THE CONSOLE Safety Key CONSOLE OPERATION retum to the minimum incline level. This will calibrate the incline system. The heart of the treadmill is the state-of-the-art programmable console. The console offers beth manual and progremmable modes, and features four independent displays to provide continuous exemise feedback. Please read these Instructions carefully before operating the console.
PROGRAMMABLE MODE OPERATION In the programmable mode, the console will automatically control either the speed of the walking belt or the incline of the treadmill, according to programs you create. Follow the four steps below to create a program. 1. Select the WALK, RUN or INCLINE Mode Press the MODE button repeatedly to select the WALK, RUN or INCLINE mode. An Indicator will light to show which mode you have selected.
OPERATION OF THE DISPLAYS •TIME Display when the console is in the manual mode, this display will show the total time that the waJkingbell has been moving. (If the treadmill is run for longer than g9 minutes and 59 seconds, the display will reset to zero and the treadmill will slow to a stop.) If desired, a time goal san be sot. To set a time goal, first stop the walking bell Next, press the TIME SET buttons to set the length of time that you plan to exercise.
TROUBLE-SHOOTING AND STORAGE Most treadmill problems can be solved by following the simple steps below. Find the symptom that applles, and follow the steps listed. If further aeelstance !s needed, call our Customer Servlce Department toll-free at 1-800-736-6879, Monday through Saturday, 7 a.m. untll 7 p.m. Central Time (excludlng holldays). 1. SYMPTOM: THE POWER DOES NOT TURN ON a. Make sure that the power cord is plugged into a properly grounded outleL (See HOW TO PLUG IN THE POWER CORD on page 7.
S. SYMPTOM: THE WALKING BELTIS OFF-CENTER OR SLIPS WHEN WALKED ON a. If the walking belt has shifted to the left, first remove the safety key and UNPLUG THE POWER CORD. Using the 3/16" allen wrench, turn the left rear roller adjustment bolt clockwise, and the right bolt countemlockwise, 1/4 of a tum each. Be careful not to overtighten the walking belt. Plug in the power cord, insert the safety key and run the treadmill for a few minutes. Repeat until the walking belt is cantered. b.
CONDITIONING GUIDELINES The following guidelines will help you to plan your exercise program. Remember that proper nutrition and adequate rest are essential for successful results. I WARNING: ..,or. beginning this or any exercise program, consult your physician. This Is aspeclally Important for Individuals over the age of 35 or Individuals with pre-exlotlng health problems. EXERCISEINTENSITY To maximize the benefits of exercising, it is important to exercise with the proper intensity.
PART LIST--Model Key No. 1 - 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 -- 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 •42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 14 Part No. Qty.
EXPLODED DRAWING--Model No. 831.297452 R49s^ T 9 85 76 1\ 77 5 71 L/ 78 37 74 17 98 88 15 29 87 19 26 15 82 70 66 81 99 2 / 90 , 22 44 42 .
SF_ARS" The model number and serial number of your SEARS LIFESTYLER e EXPANSE 500 treadmill are listed on a decal attached to the frame. See the fmnt cover of this manual to find the location of the decal. Model No. 831.297452 If you find that: All replacement pads are available for immediate purchase or special order when you visit your nearest SEARS Service Center, or the Service Department of most SEARS Stores.