Use & care guide

2
DRYER SAFETY
Before beginning installation, carefully read these instructions. This will simplify the installation and ensure the dryer
is installed correctly and safely. Leave these instructions near the Dryer after installation for future reference.
NOTE: The electrical service to the Dryer must conform with local codes and ordinances and the latest edition of the
National Electrical Code, ANSI/NFPA 70.
NOTE: The gas service to the Dryer must conform with local codes and ordinances and the latest edition of the
National Fuel Gas Code ANSI Z223.1.
Your safety and the safety of others is very important. We have provided many important safety messages in the Installation
Instructions / Use & Care Guide and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol. This symbol alerts you to hazards that can kill or hurt you or others. All safety messages will
be preceded by the safety alert symbol and the word "DANGER" or "WARNING". These words mean:
DANGER
All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what can happen if the
instructions are not followed.
Contents
SUBJECT PAGE
Pre-Installation Requirements.................................2
Electrical Requirements..........................................3
Exhaust System Requirements............................3-4
Gas Supply Requirements.......................................4
Rough-In Dimensions..............................................5
Unpacking................................................................5
Reversing Door Swing.............................................5
Location of Your Dryer.............................................6
Electrical Installation...............................................7
Grounding Requirements........................................7
Electrical Connections—3-wire..............................8
Electrical Connections—4-wire..............................8
Installation................................................................9
Lint Blade Retaining Pin Location...........................9
Meter case instructions......................................9-12
Replacement Parts.................................................12
Parts lists.........................................................13-14
Warranty...............................................................15
Back Cover...........................................................16
Record Coin Box
Key Number__________________________
Key number is on key and/or coin box.
Product Record
For Sears warranty information or to contact a Sears Service
Center, call 1-800-4-my-HOME (1-800-469-4663)
If you need SERVICE or PARTS for your Kenmore
coin-operated washer: be ready to give the model
number, serial number and date of purchase. Record
below.
Model number__________________________________
Serial number___________________________________
Purchase date___________________________________
For your safety the information in this manual must be followed to minimize the risk of fire or explosion or to prevent
property damage, personal injury or loss of life.
- Do not store or use gasoline or other flammable vapors and liquid in the vicinity of this or any other appliance.
- WHAT TO DO IF YOU SMELL GAS
· Do not try to light any appliance.
· Do not touch any electrical switch; do not use any phone in your building.
· Clear the room, building or area of all occupants.
· Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier's instructions.
· If you cannot reach your gas supplier, call the fire department.
Installations must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by the state,
province, or region where this appliance is being installed.
You can be killed or seriously injured if you don't immediately follow instructions.
You
can be killed or seriously injured if you don't follow instructions.
PRE-INSTALLATION REQUIREMENTS
Tools and Materials Required for Installation:
1. Phillips head screwdriver.
2. Channel-lock adjustable pliers.
3. Carpenter's level.
4. Flat or straight blade screwdriver.
5. Duct tape.
6. Rigid or flexible metal 4 inch (10.2 cm) duct.
7. Vent hood.
8. Pipe thread sealer (Gas).
9. Plastic knife.