HCT300 325-1410 12/17/03 9:50 AM Page 1 Instruction Manual Manual de Instrucciones Directives ENGLISH ™ by ESPAÑOL FRANÇAIS HCT300 CHCT300
ENGLISH HCT300 325-1410 12/17/03 9:50 AM Page 2 ™ by HCT300 CHCT300 Congratulations! You have purchased a Regent Cool Touch 300 watt halogen worklight. This worklight has been designed to provide a wide concentration of light for any project inside or outside your home. The special outer shell of this worklight is much cooler and safer than an ordinary halogen worklight. Please review the following important safety instructions carefully.
HCT300 325-1410 12/17/03 9:50 AM Page 3 Replacing the bulb Step 1: Loosen the screw located at the top of the fixture recessed inside the outer shell. Step 2: Open door frame assembly for easy access to the bulb. Step 3: Using gloves or a soft cloth, press the bulb to one side of the socket as indicated on the metal reflector. Remove opposite end of bulb from the other side of the socket. Reverse this procedure to install a new replacement bulb.
HCT300 325-1410 12/17/03 9:50 AM Page 4 ENGLISH Two year limited warranty Cooper Lighting (“the Company”) warrants this product (“the product”) against defects in material or workmanship for a period of two years from date of original purchase, and agrees to repair or, at the Company’s option, replace a defective product without charge for either replacement parts or labor during such time. This does not include labor to remove or install fixtures.
