Owner's Manual Manual del Propietario Canister Vacuum Cleaner A spiradora Model, Modelo 721.24195 Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A www. sears, corn Part No.
BeforeUsingYour New Vacuum ...................2 PerformanceFeatures ...................................... 8 KenmoreVacuum CleanerWarranty .............2 ChangingThe Dust Bag .................................... 9 Cleaning MotorSafety Filter ..............................9 ImportantSafety Instructions ........................3 Cleaning ExteriorandAttachments .................10 Parts and Features...........................................4 Assembly .....................................................
WARNING Your safety is important to us. To reduce the risk of fire, electrical shock, injury to oersons or damage when using your vacuum cleaner, follow basic safety precautions including the following: Readthis manualbefore assemblingor using your vacuum cleaner. Useyour cleaneronly as describedinthis manual.Useonly withsuppliedattachments. To reducethe risk of electricalshock- Do not use outdoors or on wetsurfaces. Disconnectelectricalsupply beforeservicing or cleaningout brush area.
It is important to know your vacuum cleaner's parts and features to assure its proper and safe use. Review these before using your cleaner.
CANISTER Before assembling your vacuum cleaner, be sure you have all the parts shown in PARTS AND FEATURES. TELESCOPIC 1. Open the canister hood. 2. Check to see that the dust bag is properly installed.See CHANGING THE DUST BAG for instructions. 3. Check to see that the motor safety filter is properly installed. See CLEANING MOTOR SAFETY FILTER for instructions. WAND Hold spring latch and pull out or push in wand to required length. '_ Spring Latch AIR-TURBINE MotorSatety BRUSH NOZZLE 1.
USE AND CARE The vacuum cleaner creates suction that picks up dirt. Rapidly moving air carries the dirt to the dust bag through the air flow passages. The dust bag lets the air pass through, while it traps the dirt. For best cleaning results, keep the airflow passage open. Check the starred areas occasionally for clogs. Unplug from outlet before checking. NOTE: Do not stand canister body on its end while operating or you will block the exhaust vents.
ATTACHMENTS ON HANDLE ATTACHMENTS ON WANDS The crevice tool and dusting/upholstery tool do not have locking holes. 1. Press handle button on wand and remove it from handle. Put on attachments as needed. See chart below. 2. Push crevice tool onto handle. The dusting/upholstery tool has two options. When the brush is removed the remaining part can be used as an upholstery tool. Uph, Tool Dusting Brush 3. Dusting/Upholstery tool will fit onto extension wand only.
Suggested sweeping pattern For best cleaning action, the Air-Turbine Brush Nozzle should be pushed straight forward from you and pulled straight back. This pattern should be continued across the rug with slow, gliding motions. Carpeted stairs need to be vacuumed regularly. For best cleaning results, put the slide switch on MAX. NOTE: Fast, jerky strokes do not provide complete cleaning. section. ONE-TOUCH For best cleaning results, keep the airflow passage open. Check occasionally for clogs.
For best cleaning results, the dust bag should be changed before it gets full. Use dust bag no. 5231FI2390J 4. Remove used bag and throw it away. 5. To insert new dust bag: • Press back the bag mount hook. • Fit bottom edge of bag mount tab onto bag mount ledge. • Pull bag mount tab flush with suction inlet hole. • Secure bag mount hook over top edge of bag mount tab. 1. Unplug cord from wall outlet. 2. Pull lid release latch out and up, then lift canister hood. 3. Press back the bag mount hook.
1. Unplug cord from wall outlet. DO NOT drip water on cleaner, _I_ 2. Clean vacuum exterior using a clean, soft cloth that has been dipped in clean water, then wrung out. Wipe dry after cleaning. NOTE: Regular cleaning helps to reduce static electricity and dust buildup on outer surfaces of cleaner and attachments. CAUTION DO NOT use attachments if they are wet. Damage to dust bag and motor may occur.
1. Press the button on the rear side of the vaccum nozzle to remove air cover. 2. Use the dusting/upholstery tool attachment to clean the brush and fan. Fan Hook Air Cover Brush Disconnect cleaner from electrical outlet. Check and remove hair, string and lint build-up frequently in the air-turbine brush and brush support areas. If build-up becomes excessive, disconnect air-turbine brush nozzle from telescopic wand. TO REMOVE BELT: 1. Turn air-turbine brush nozzle upside down. 2.
4. Carefully insert and lift screwdriver at each brush support to free brush from base. TO REPLACE BELT: 1. Install brush supports onto brush. Brush support Brush 2. Install new belt in belt groove on the brush, then over the fan shaft. Be sure belt is between the belt guards. Refer to parts list for replacement belt number. Base 5. Remove worn belt. Belt Guard Belt Groove 3. Insert each support into its base slot. 6. Slide brush supports off to check and clean brush support areas.
Review this chart to find do-it-yourself solutions for minor performance problems. Any other service needed should be performed by a Sears or other qualified service representative. Disconnect electrical supply before servicing or cleaning the unit. Electrical Shock Hazard so could result in electrical shock or personal injury. WARNING Failure to do PROBLEM POSSIBLE CAUSE Cleanerwon'tstart. 1. Unpluggedat walloutlet. 2. Trippedcircuitbreaker/blownfuse at householdservicepanel. 3.
VACUUM CLEANER PARTS For Model:721.
VACUUM CLEANER PARTS For Model : 721.241 95400 Illust. No. Part No. DESCRIPTION 1 2 3 4 5 6 3550FI1759A 3550FI1758A 3550FI3868A 3123019L 4036FI4074A 1TPL0302418 Accessory Cover Figer Cover Indicator Cover Indicator Indicator Seal Screw 3 x 8 7 8 9 5203FI2071A 5058FI3593A 4026FI3691A Dust Brush Ass'y Crevice Tool Latch 10 11 12 4970FI4260A 3650FI2422A 4370FI3678A Latch Spring Handle Handle Shaft 13 14 15 16 17 3550FI1757A 5020FI3806A 4170024A 4510FI2441A 1TPL0402818 Illust. No. Part No.
AIR-TURBINE BRUSH NOZZLE PARTS For Model:721.24195400 10 15 16 13 22 Illus. No. 1 2 3 4 5 6 7 8 Part No. 3040FI1502B 3550FI1637B 4940FI3736A 5200FI2497B 1KZZFI3001B 4930FI2452B 5901FI2001A 4280FI3003A DESCRIPTION Nozzle Base Nozzle Cover Pile Adjustment Suction Pipe Key Suction Pipe Holder Fan Assembly Bearing Ball Illus. No. 9 10 11 12 13 Part No.
Master Protection Agreements Once you purchase the Agreement, a simple phone call is all that it takes for you to schedule service. You can call anytime day or night, or schedule a service appointment online. Congratulations on making a smart purchase. Your new Kenmore® product is designed and manufactured for years of dependable operation. But like all products, it may require preventive maintenance or repair from time to time.
Antesde usar su aspiradora nueva ...............2 Garantiade la aspiradora Kenmore...............2 Irnportantesinstrucciones sobreseguridad............................................... 3 Partesy Caracteristicas.................................. 4 Consejospara aspirar........................................8 Caracteristicasde rendimiento..........................8 Cambio de la bolsa para el polvo.......................9 Limpieza del filtro de seguridad del motor.........
ADVERTENCIA Nosotros consideramos que su seguridad es muy importante. AI usar su aspiradora, para reducir el riesgo de fuego, de choque el_ctrico, de lesiones personales o de da_os, observe las precauciones b&sicas de seguridad incluyendo las siguientes: Lea este manualantes deensamblaro de usarsu aspiradora. Usesu aspiradorasolamentecome sedescribeen este manual.Oselas61ocon los aditamentossuministrados. Para reducirel riesgode chequeelectrico- No la utilice en exterioresnisobresuperficiesmojadas.
Para asegurar un uso correcto y seguro, es importante conocer las partes y caracteristicas de la aspiradora. Repase esto antes de utilizarla. Interruptor deslizable Manguera Gancho para conectar Bot6n para la manija Bot6n para el carrete del cable .,_.] Indicador de /)_ Tubo rendimiento /. / telesc6pico / / Cer de alimentaci6n (No $e muestr_ lar Botdn del tubo_ Ajuste para hilo de alfombra ..............
RECIPIENTE Antes de ensamblar su aspiradora, asegurese de tener todas las partes mostradas en PARTES Y CARACTER/STICAS. 1. Abra la oubierta del recipiente (c_nister). 2. Verifique que la bolsa para el polvo este instalada correctamente. Vea CAMBIANDO LA BOLSA PARA EL POLVO para obtener las instrucciones. 3. Verifique que el filtro de seguridad del motor este instalado correctamente. Vea LIMPIEZA DEL FILTRO DE SEGURIDAD DEL MOTOR para obtener las instrucciones.
USO Y CUIDADO La aspiradoracreaunasuccionque recogea lasuciedad. El airequese muevera.pidamente Ilevala suciedadhacia la bolsade polvoa travesde lospasajesdeflujo delaire. La bolsade polvodeja pasarel aire,mientrasqueatrapaa lasuciedad.Para obtenerlosmejoresresultadosde limpieza,mantengadespejadoslospasajesde flujodel aire.ChequeeocasionalmentelasAreascon asteriscos paraver si hayobstrucciones.Desconectedel tomacorrienteantesde hacerloschequeos.
ADITAMENTOS EN LA MANIJA ADITAMENTOS 1. Presione el bot6n de la manija en el tubo y retfrelo fuera de la manija. EN LOS TUBO8 Laherramientapara hendidurasy la herramientapara polvo/ paratapicerianotienenagujerosde sujeccion. InstalelosaccesoriossegQnsea necesario. Vealatablaquesigue. 2. Empuje la herramienta para hendiduras en la manija. Lapieza parapolvo/ paratapiceffatiene2 opciones. Cuandose retiraelcepillofrontal,laparterestante puedeser usadacomoun accesoriopara tapiceffa.
Trayectoriade barrido sugerida Para obtener la mejor acci6n de limpieza,la Tobera condel cepillo a turbina de aire debe ser empujadahacia adelantey jalada hacia atrAs. Se debe continuar de esta forma a por toda la alfombra,deslizAndolacon movimientoslentos. NOTA: Los movimientosr_.pidosy bruscosno proporcionanuna limpiezacompleta. CONTROL Los escalonesalfombrados debenser aspirados regularmente.Para obtener los mejores resultados de limpiezaponga el interruptor deslizableen MAX.
Para obtener los mejores resultados de limpieza, la bolsa para polvo debe ser cambiada antes de que se Ilene. Use la bolsa no. 5231FI2390J 1. Desconecteel cable del tomacorriente. 2. Jale el cerrojode la tapa hacia afueray hacia arriba,luego levante la tapa del recipiente. 3. Presionehacia atr_.sel ganchode montajede la bolsa. 4. Retire la bolsa usada y desechela. 5. Para insertar una nueva bolsa: • Presione hacia atras el gancho de montaje de la bolsa.
1, Desconecte el cable de alimentacidn del tomacorriente. NO deje gotear agua sobre la aspiradora. PRECAUCION 2. Limpie el exterior de la aspiradora con un paho suave escurrido que haya sido mojado con agua limpia. Seque luego de limpiar. NOTA: Una limpieza regular ayuda a reducir la electricidad est&tica y la acumulacion de polvo en la superficie de la aspiradora yen los accesorios. NO use los accesorios cuando est_n mojados. Se pueden ocasionar da_os a la bolsa para polvo y al motor.
1. Presione el boton en el lade posterior de la tobera de la aspiradora para retirar la cubierta del aire. 2. Use el accesorio para desenpolvar / para tapiceria yaspire el cepillo y el ventilador. Ventilador Bot6ndeltubo Cubierta del aire Desconecte la aspiradora del tomacorriente. Revise frecuentemente y retire la acumulacion de pelo, hilos y pelusas de las _reas del Cepillo a turbina de aire y de sus soportes. Si la suciedad es excesiva, desconecte la tobera del Cepillo a turbina del tubo telesc6pico.
4, Cuidadosamente inserte y levante el destornillador en cada uno de los soportes del cepillo para liberarlo de la base. PARA REEMPLAZAR LA BANDA: 1. Instale los soportes en el cepillo. del cepillo 2. Instale la banda nueva en la ranura del cepillo, luego sobre el eje del ventilador. AsegL_rese de que la banda quede entre sus resguardos. cepillo Base 5. Retire la banda desgastada. Eje del ventilador Banda para labanda Ranuraparala banda 3. Inserte cada soporte en su ranura de la base. 6.
Revise esta tabla para encontrar soluciones, que puede hacer usted mismo, a problemas leves de rendimiento. Cualquier otro servicio de mantenimiento que sea necesario, debe ser realizado per Sears o per algL_notro representante de mantenimiento calificado. _ Desconecte la fuente de energia el_ctrica antes de hacer un mantenimiento o de limpiar a la unidad. ADVERTENCIA Peligro de choque el_ctrico El no hacerlo puede dar como resultado choques el_ctricos o heridas personales.
Acuerdos Maestros de Proteccibn Felicitaciones por haber hecho una compra inteligente. Su nuevo producto Kenmore® esta diseSado y fabricado para brindarle aSos de operaci6n confiable. Pero como todo producto, de vez en cuando puede necesitar mantenimiento preventivo o reparaciones. Es entonces cuando el tener un Acuerdo Maestro de protecci6n le puede ahorrar dinero y molestias. Adquiera hoy un Acuerdo Maestro de Protecci6n y protejase contra molestias o gastos imprevistos.
Your Home For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, nomatterwhomadeit, nomatterwhosoldit! HHHHHHH_ For!hereplacementparts, accessoriesand iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii owners manualsthatyou needtodo-it-yourself, iiiiiiiiiiiiiiiii ForSearsprofessional installationofhomeappliances and itemslikegaragedooropenersandwaterheaters, 1-800-4-MY-HOME ® iiiiiiiiiiiiiiiii (1-800-469-4663) www.sears.