Owner`s manual

Rehanging the fresh food door
(a) Lower the bottom
socket of the fresh food
door onto the pin on the
bottom hinge° Be sure
the washer is in place on
the pin.
(b) Insert the pin on the
center hinge into the
socket in the top of the
door. Note: The center
hinge must be turned
over as shown when
mounted on the left side,
Washer
(€) Tilt the door toward
the cabinet. As the door
is brought into position,
slide the hinge under the
head of the screw which
earlier had been partly
driven into the outermost
holeo Insert the remaining
screw, then tighten both
screws securely_
Examining the door gaskets
Check the door gaskets all aro_Jnd, making sure
no gaps are visible between the gaskets and the
cabinet° If a gap shows, try stretching the gasket
away from the door so the magnet in the gasket will
contact the cabinet surface, being careful not to
dislodge the gasket,
Replacing the base grille
(on models so equipped)
Pull the plastic filler up
and off the base grille
and reinstall it on the
opposite side.
Replace the base grille
by lining up the clips on
the back of the grille with
openings in the baseplate
and pushing the grille
forward until it snaps
into place°
Left Side Right Side
Rehanging the freezer door
(a) Lower the bottom
socket of the freezer
door onto the center
hinge pin, Be sure the
washer is in place on
the pin,
(b) Tilt the door toward
the cabinet, lifting the
top hinge so the pin fits
into the socket on top of
the door°
(€) Before tightening the top hinge screws, make
sure the top of the door is level with the cabinet top
and the space between the doors is equal across the
entire front, Do not overtighten these screws--tighten
them until they are iust snug, then turn them in
another one-half turn°
15