Specifications

• Replace the batteries about once a year.
• Do not dispose of batteries in fire-they may explode.
Check the power of the batteries after loading them. Turn the battery check ring clockwise until it
stops.
If exposure meter needle in the viewfinder swings to battery
power check mark "C", the batteries have sufficient power. If
the needle doesn't move or stays below check mark "C" the
batteries must be replaced. For replacement use Mallory MS76,
Eveready S76 or equivalent.
2. LOADING THE FILM
Pull up film rewind knob until back cover snaps open. Then, pull it out ill the way to allow
for insertion of the film cartridge. Swing open back cover and place a film cartridge into
film chamber.
Push down film rewind knob to its original position by turning film rewind crank
clockwise or counterclockwise so that film rewind shaft engages film cartridge and locks
it in place.
Insert the film leader into one of the slots in the film take-up spool. To bring the slot into a
convenient position, rotate film take-up spool in the direction of arrow with your finger.