2.0 HP " 0-70 MPH z POWER ll"4CLINE . EXPANDED RUNNING SURFACE SF_AIRSo Model No. 831.297260 Serial No. The serial number can be found in the location shown below. Write the serial number in the space above, Serial Number Dec, .I_ CA UTION!: Read all safety precautions and instructions in this manual before using this equipment. Keep this manual in a safe place for future reference.
i i_ ,i FULL 90 DAY WARRANTY For 90 days from the date of purchase, when proper assembly and maintenance procedures detailed in the Owner's Manual are followed. SEARS will, free of charge, repair or replace and install a replacement part for any defective part.
d 2.0 HP " 0-10 MPH " POWER INCLII_4E . EXPANDED TABLE OF CONTENTS WARRANTY IMPORTANT ...................................................................... SAFETY PRECAUTIONS ................................................. RUNNING SURFACE 2 4 BEFORE YOU BEGIN .............................................................. ASSEMBLY ...................................................................... OPERATION AND ADJUSTMENT .....................................................
IMPORTANT SAFETY kWARNING: the following To reduce Important PRECAUTIONS the risk safety of burns, precaut!ons fire, electric and Information shock before or Injury to persons, operating read the treadmill. 1. Posltlon the treadmill on a level surface, wlth at least 8 feet of clearance behind the treadmill. Do not place the treadmill near water, outdoors or on any surface that blocks an air opening. Istered. Do not operate where 2.
BEFORE YOU BEGIN Thank you for selecting the SEARS LIFEST'(LER mill blends advanced technology with innovative cular exercise For your additional in the convenience and privacy _' EXTEND 10.0 treadmill. The EXTEND 10.0 treaddesign to let you enjoy an excellent form of cardiovas- of your home. safety and benefit, read thls manual carefully before uslng the treadmill. If you have questions, please call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m.
ASSEMBLY Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. TOOLS REQUIRED FOR ASSEMBLY: An 8" adjustable wrench _ (not Included). 1. With the help of a second person, raise the Left Upright (3) and Right Upright (not shown) to a vertical position. Align the hole in the lower end of the Left Upright with the hole in the side of the Left Frame Rail (56).
OPERATION • PLUGGING AND ADJUSTMENT IN THE POWER CORD This product must be grounded, if it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. Plug the power cord Into an appropriate outlet that Is properly Installed and grounded In accordance with all local codes and ordinances.
CONSOLEDIAGRAM Control Knob Motivational Fitness Monitor -[22_ / Pulse Earclip INSTALLING Power Jack / ? Indicator Inclin Safety Key!Clip Control i_ BATTERIES Battery The motivational fitness monitor requires Cover two "AA= batteries (not included); alkaline batteries are recommended. Slide open the battery cover located on the underside of the console. Grasp the red cord and remove the battery clip from the console.
Carefully step onto the walking belt and begin exercising. Change the speed of the walking belt as desired by turning the speed control knob. To stop the walking belt, turn the knob to "reset.' MOTIVATIONAL FITNESS MONITOR The five displays of the motivational plays can be reset by pressing fitness monitor provide the ON/RESET button. continuous exercise The five displays feedback, are described The dis- below: TIME--This display shows the elapsed time.
ASSEMBLY UPDATE DURING ASSEMBLY S_EP AND ALL-FOtILOWING Iki_USTRATIONS _ THE PART'NO.:(49)
TROUBLE-SHOOTING Most treadmill problems AND STORAGE can be solved by following the simple steps below. that applies to your treadmill and follow the steps listed. If further assistance Customer Service Department toll-free at 1-800-999-3756, Monday through Mountain "i3me (excluding holidays). 1. SYMPTOM: THE POWER DOES NOTTURN a. Make sure that the power cord is plugged cord has been plugged console. Various in this manual.) C.
b. If an extensioncordis needed,useonlya 14-gaugegeneral-purpose cordoffivefeetor lessin length. c. If the walkingbelt is overtightenedotreadmillperformance maydecreaseand the walkingbelt maybe permanently damaged. Removethe safetykey and UNPLUGTHE POWERCORD. Usingthe allenwrench,turn both rear rolleradjustmentboltscounterclockwise,1/4of a turn. Whenthe walkingbelt is properlytightened,you should be able to lift eachsideof the walkingbelt3-4 inchesoff the walkingplatform.
CONDITIONING The following and adequate guidelines will help you to plan your exercise rest are essential , kWARNING: This Is especially health problems. EXERCISE GUIDELINES Before Important for successful beglnnlng program. that proper nutrition results. this or any exercise for Individuals Remember program, consult over the age of 35 or Individuals your physician.
SUGGESTED STRETCHES The following stretches can provide a good warm-up or cool-down. Correct shown in the drawings below. Move slowly as you stretch--never bounce. form for each stretch is TOETOUCHSTRETCH Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible. Hold for t5 counts, then relax. Repeat 3 times. Stretches: Hamstrings, HAMSTRING back of knees and back.
PART LlSTmModel 14 Key No. Part No. Qty. 1 2 014086 013485 8 4 3 4 5 115534 114005 115816 6 7 8 No. 831.297260 Rev.12/93 Key No. Part No. Qty.
EXPLODED DRAWING--Model No. 831.297260 Rev.iz_93 11_ 16 12 15 22 ,-24 68 31 _7 23 38 71 51 2O 7 83 71 25 28 27 71 36 .,_ I I 70 I i 71 68 72 \ 56 i 49 i 39 69 4O 73 74 \ I 41 48 i 47 76 71 6 14 55 /, 76 61 62 66 57 15
ORDERING REPLACEMENT PARTS Each TREADMILL has its own MODEL requesting or repair parts for your TREADMILL. service NUMBER. Always mention All parts listed herein can be ordered through SEARS, ROEBUCK most SEARS RETAIL STORES. tf parts you need are not stocked to a SEARS PARTS DISTRIBUTION CENTER for handling. WHEN ORDERING 1. The MODEL 2. The NAME REPAIR NUMBER 4. The DESCRIPTION ALWAYS of the product of the product 9. The PART NUMBER PARTS, (SEARS this MODEL INFORMATION: (831.
