£SP • 0-10.0 MPN • l.StIP DC MOTOR • WIDE TRAKFRAME • SOFTSTRIDEADJUSTABLE SUSPENSIONDECK • EXTENDED STRIDEPROFILE • ELECTRONICPOWER INCLINE • MADEIN THE U.S.A. Model No. 831.297052 Serial No. Write the serial no. in the space above. ® 0 WNER °S MAN UAL CA UTION: manual before Carefully read all safety precautions and instructions in this using this equipment. Save this manual for future reference.
FULL 90 DAY WARRANTY For 90 days from the date of purchase, when proper assembly and maintenance procedures detailed in the Owner's Manual are followed, SEARS wil!, free of charge, repair or replace and install a replacement part for any defective part, when this treadmill is used in a normal manner. This warranty does not apply when this treadmill SERVICE IS AVAILABLE CENTER/DEPARTMENT is used for commercial SIMPLY BY CONTACTING IN THE UNITED STATES.
£SP • EXTENDED • O.10.0MPN • 1.6 HP 0C MOTOR • WIDE TRAKFRAME STRIDEPROFILE • SOFTSTRIOEAD.IUSTABLE SUSPENSIONDECK • ELECTRONICPOWERINCLINE • MADEIN THE U.S.A. TABLE OF CONTENTS Important Safety Precautions ...................... Before You Begin ............................... Assembly ..................................... Operation and Adjustment ........................ Trouble-Shooting and Storage ..................... Conditioning Guidelines .......................... Part List ....................
IMPORTANT SAFETY PRECAUTIONS AILWARNING: To the following , . reduce important the risk of burns, safety precautions fire, electric and information shock before or injury to persons, operating the treadmill. Position the treadmill on a level surface, with at least 8 feet of clearance behind the treadmill. Do not place the treadmill near water, outdoors or on a surface that blocks any air opening. Do not operate where aerosol products are used or where oxygen is being administered.
BEFORE YOU BEGIN Thank you for selecting a SEARS ®LIFESTYLER 10.0 ESP treadmill. The LIFESTYLER 10.0 ESP treadmill combines advanced technology with innovative design to let you enjoy an excellent form of cardiovascular exercise in the convenience and privacy of your home. The heart of the treadmill is the innovative OPTIONS ® base console, offering an impressive array of features to help you get the most from your exercise.
ASSEMBLY Set the treadmill in a cleared area and remove all packing included before disposing of the packing materials. TOOLS , NEEDED FOR ASSEMBLY: materials. Be sure that all parts are adjustable wrench Align the lower end of the Right Handrail (20) with the holes in the side of the treadmill Frame (47). Attach the Handrail with two Short Handrail Bolts (35) and Handrail Washers (36). Be careful not to pinch the wires in the Handrail. Do not fully tighten the Bolts.
OPERATION AND ADJUSTMENT PLUGGING THE POWER CORD IN This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. Plug the power cord into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
CONSOLE OPERATION The heart of the treadmill is the innovative OPTIONS base console. The OPTIONS base console tures a safety key-operated power switch, a large, easy-to-read LED display, convenient speed controls and a multiple-mode exercise monitor.
TURNING THE POWER ON Plug the power cord in. (See PLUGGING instructions.) Step onto the foot rails of the treadmill. onto your waistband. kWARNING: instantly turning CORD Find the clip attached Do not stand on the walking wear the clip when operating console, THE POWER the treadmill; IN on page 7 for proper grounding by a cord to the safety key. belt when turning if you fall, the safety the power Slide the clip on. Always key will be pulled from the base off the power.
TIME/SET: This mode displays the elapsed time. This mode also allows time goals to be set. To set a time goal, first select the TIME/SET mode. (Make sure the SCAN mode is not selected.) Press the SET buttons to set the length of time you plan to exercise. Each time one of the buttons is pressed, the time displayed will change by 10 seconds. The buttons can be held down to set a time goal quickly. As you exercise, the time will be counted down. When the time goal is completed, a tone will sound.
1. SYMPTOM: THE POWERDOESNOTTURNON a. Make sure the power cord is plugged into a properly grounded outlet. (See OPERATION AND ADJUSTMENT in this manual.) If an extension cord is necessary, use only a 14-gauge generalpurpose cord of approximately five feet in length. b. After the power cord has been plugged in, make sure the safety key is fully inserted into the base console. Various indicators on the base console should light. MENT in this manual.) C.
C. If the walking belt is overtightened, treadmill performance may be reduced and the walking belt permanently damaged. Remove the safety key and UNPLUG THE POWER CORD. With the allen wrench included, turn both rear roller adjustment bolts counterclockwise, 1/4 of a turn. Plug in the power cord and reinsert the safety Rear Roller Adjustment Bolts key. Run the treadmill for a couple of minutes. Repeat until the tension of the walking belt is correct.
CONDITIONING The following and adequate guidelines will help you to plan your exercise rest are essential for successful results. kWARNING: This is especially health problems. EXERCISE GUIDELINES Before important beginning program. this or any exercise for individuals Remember program, that proper nutrition consult over the age of 35 or individuals your physician. with pre-existing INTENSITY To maximize the benefits of exercising, it is important to exercise with the proper intensity.
PART LIST---Model Key No. Part No. Qty. 1 2 3 109244 013464 106337 1 2 1 4 5 6 7 054013 101508 108080 109274 1 1 31 1 8 109356 9 10 109370 102959 11 12 13 14 15 16 17 Rev.11/92 Key No. Part No. Qty.
EXPLODED DRAWINGmModel No. 831.297052 Rev11_92 8 > 12 13 6 18 6 19 79 75 71 34 57 26 72 56 43 36 46 44 45 29 30' 46 \ 37 67 68 16 34 48 49 _66 65 52 63 64 78 53 © 1992 Sears, Roebuck and Co.
ORDERING REPLACEMENT PARTS Each TREADMILL has its own MODEL NUMBER. Always mention the MODEL requesting service or repair parts for your TREADMILL. NUMBER All parts listed may be ordered through SEARS, SEARS RETAIL STORES. CENTERS ROEBUCK AND CO. SERVICE If parts you need are not stocked locally, your order will be transmitted TION CENTER for handling. WHEN ORDERING 1. The MODEL REPAIR NUMBER PARTS, ALWAYS GIVE THE FOLLOWING 4.
