LS ehte 0-8 mph • 2.0 hp • direct pulse interface • fat burn guide SEARS" Model No. 831.297540 Serial No. The serial number can be found in the location shown below. Write the serial number in the space above. Serial Number Decal CAUTION!: Read all safety precautions and instructions in this manual before using thls equipment. Keep this manual in a safe place for future reference.
FULL 90 DAY WARRANTY For 90 days from the date of purchase, when prcper assembly and maintenance procedures detailed in the Owner's Manual are followed, SEARS will, free of charge, repair or replace and install a replacement part for any defective pad, when this treadmill is used in a normal manner. This warranty does not apply when this treadmill is used for commercial or rental purposes. SERVICE IS AVAILABLE SIMPLY BY'CONTACTING YOUR NEAREST SEARS SERVICE CENTEPJDEPARTMENT IN THE UNITED STATES.
LS elite O 0-8 mph ° 2.0 hp • direct pulse interface • fat burn guide TABLE OF CONTENTS IMPORTANT SAFETY PRECAUTIONS ......................................................... BEFORE YOU BEGIN ....................................................................... ASSEMBLY ............................................................................... HOW TO USE THE PULSE SENSOR .......................................................... OPERATION AND ADJUSTMENT ....................... : ...................
IMPORTANT SAFETY PRECAUTIONS A WARNING: To reduce the risk Of burns, fire, electric shock or injury to persons, read the following important safety precautions and information before operating the treadmill. 1. Position the treadmill on a level surface, with at least 8 feet of clearance behind the treadmill. Do not place the treadmill near water, outdoors or on any surface that blocks an air opening. Do not operate where aerosol products are used or where oxygen is being administered. 2.
BEFORE YOU BEGIN Thank you for selecting the SEARS LS ELITE 780 treadmill. The LS ELITE 780 treadmill blends advanced technology with innovative design to let you enjoy an excellent form of cardiovascular exercise in the convenience and privacy of your home. For your safety and benefit, read this manual carefully before using the treadmill. If you have additional questions, please call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m.
ASSEMBLY Assembly requires the assistance of a second person. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembl_is completed. THE FOLLOWING TOOLS ARE REQUIRED FOR ASSEMBLY: An adjustable wrench _ (not Included). . Find the Right Upright (15) (see the inset drawing to identify the Right Upright). Insert a 3/8" x 3 1/2" Bolt (27) with one of the four Upright Washers (26) into the higher hole in the bottom of the Right Upright.
5. Plug the lower end of the Upright Wire Harness (12) into the 20" Wire Harness (45). The small latch on the Upright Wire • Harness should snap onto the 20" Wire Harness (see the upper inset drawing). If the Wire Harnesses do not fit easily, turn them; do not force the Wire Harnesses together. Adjust the 6" Cable Loom (30) so that the Cable Loom is inserted into the Right Upright (15) and the Rear Safety Cover (52) (see the lower inset drawing). Be careful not to damage the Wire Harnesses. 12 52 6.
HOW TO USE THE PULSE SENSOR "the LS ELITE 780 treadmill features an innovative headband-style pulse sensor. The rubber-armored pulse sensor and lightweight headband are specially designed for greater accuracy, comfort and durability• To get the best performance from the pulse sensor, please read the following instructions• ADJUSTING THE HEADBAND 1• The headband should fit snugly around your head, without being uncomfortable.
OPERATION AND ADJUSTMENT PLUGGING IN THE POWER CORD This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. Plug the power cord into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
DIAGRAM OF THE CONSOLE The heart of the treadmill is the state-of-the-art interactive console. The console offers electronic speed and incline control, six independent LED displays, and a Fitness Test that measures your fitness level. In addition, a unique Fat Calorie Monitor is built into the console. During exercise, your body burns either fat calories or carbohydrate calories, depending on the intensity of your exercise.
ENTERING YOURAGEANDWEIGHT For the console to measure calories accurately, and for the Fat Calorie Monitor and the Fitness Test to function properly, your age and weight must be entered into the console. To enter your age, press one of the AGE SET buttons. The current age setting will be shown in the PULSE display. Each time one of the AGE SET buttons is pressed, the age setting will change by 1 year. If the buttons are held down, the age setting will change in increments of 5 years.
SPEED DISPLAY--The speed display will show the speed setting that has been selected. TIME DISPLAY--The time display will show the total tir_e that the walking belt has been moving. Note: If the Fitness Test is selected, the display will be reset to zero. The display will be reset again when the Fitness Test is completed. DISTANCE DISPLAY--The distance display will show the total distance that you have walked or run, in miles. Note: If the Fitness Test is selected, the display will be reset to zero.
TURNINGOFFTHEPOWER To turn off the power, remove the safety key from the console. All indicators and LED displays will darken. Store the safety key in a secure location. INFORMATION MODE The console features an information mode that keeps track of trip time and distance, as well as the total time and distance that the treadmill has been operated. To select the information mode, hold down the STOP button while inserting the safety key into the console.
TROUBLE-SHOOTING AND STORAGE Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our Customer Service Department toll-free at 1800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time. 1. SYMPTOM: THE POWER DOES NOT TURN ON a. Make sure that the power cord is plugged into a properly grounded outlet. (See OPERATION AND ADJUSTMENT on page 9.
keyand UNPLUG THE POWER CORD. Using the belt tool, turn the rear roller adjustment bolt counterclockwise 1/4 of a turn. Plug in the powercord,insertthe safety key and runthetreadmillfor a few minutes.Repeat untilthewalkingbelt is centered. _'Belt Tool U STORAGE o Unplug the power cord when the treadmill is not in use. Remove one bolt and washer from the lower ends of the left and right uprights. Loosen the other bolt on each side. Carefully lay the console on the treadmill.
CONDITIONING GUIDELINES • The following guidelines will help you to plan your exercise program. Remember that proper nutrition and adequate rest are essential for successful results. RNING: Before beginning this or any exercise prog ram, consult your physician. This is especially Important for individuals over the age of 35 or individuals with pre-existing health problems. EXERCISE INTENSITY To maximize the benefits of exercising, it is important to exercise with the proper intensity.
SUGGESTED STRETCHES The following stretches can provide a good warm-up or cool-down. Correct form for each stretch is shown in the drawings below. Move slowly as you stretch-never bounce. TOE TOUCH STRETCH Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible. Hold for 15 counts, then relax. Repeat 3 times. Stretches: Hamstrings, back of knees and back.
PART LISTmModel No. 831.297540 "Key No. Pa_ No. 1 120554 2 120202 3 120244 4 120245 5 111869 6 120203 7 120489 8 013141 9 120769 10 120552 11 -117988 12 '.
EXPLODED DRAWINGmModel No. 831.297540 R994A 9 2 5 6 14 4 3O 93 94 102 10 \ 11 3 95 97 64 '100 91 27 61 62 100 16 17 41 89 88 32 54 84 86 23 / 26 52 51 53 60 5O 82 39 87 75 69 19
ORDERING REPLACEMENT • _ PARTS . Each TREADMILL has its own MODEL NUMBER. Always mention this MODEL NUMBER when requesting service or repair parts for your TREADMILL. All parts listed herein can be ordered through SEARS, RoEBucK AND CO. SERVICE CENTERS and most SEARS RETAIL STORES. If parts you need are not stocked locally, your order will be transmitted to a SEARS PARTS DISTRIBUTION CENTER for handling. WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING INFORMATION: 1.
