Stepper Machine User Manual

10
8
9
8. Apply a small amount of grease to the axle on
the Left Pedal Arm (14).
Position the Left Handlebar Leg (12) as shown.
Then, insert the Left Pedal Arm (14) into the Left
Handlebar Leg. Attach the Left Pedal Arm with
an M10 x 20mm Screw (61), a Pedal Axle Cover
(39), and an M10 Washer (64). Do not over-
tighten the Screw; the Left Pedal Arm must
pivot easily.
Attach the Right Pedal Arm (not shown) in
the same way.
9. Apply a small amount of grease to the axle on
the Left Pedal Arm Bracket (43).
Attach the left Pedal Leg (8) to the Left Pedal
Arm Bracket (43) with two M10 x 20mm Screws
(61) and two M10 Split Washers (79).
Attach the right Pedal Leg (8) in the same
way.
See step 5. Tighten the M10 x 20mm Screws
(61).
See step 4. Tighten the M8 x 13mm Screws
(62).
39
8
8
12
61
64
14
Grease
61
79
43
Grease