Stepper Machine User Manual

12
12
12. While a second person holds the Console (3)
near the Upright (2), connect the four wires on
the Console to the Upper Wire Harness (81),
the two Heart Rate Wires (92, 116), and the
Receiver Wire (109). Insert the excess wire into
the Upright.
Tip: Avoid pinching the wires. Attach the
Console (3) to the Upright (2) with four M4 x
16mm Screws (67).
3
81
67
2
92
Avoid pinching
the wires
13
13. Plug the Power Adapter (84) into the receptacle
on the front of the elliptical. To plug the Power
Adapter into an outlet, see HOW TO PLUG IN
THE POWER ADAPTER on page 13.
14. Make sure that all parts are properly tightened before you use the elliptical. Note: After assembly is com-
pleted, extra parts may be left over. Place a mat beneath the elliptical to protect the floor.
84
109
116