Owner`s manual

ALTERNATE LOCATIONS -

STANDPIPE AND FLOOR DRAIN SYSTEMS

38 in

(99 cm)

Standpipe drain system: Needs a 2 in (5 cm)

minimum diameter standpipe with minimum

carry-away capacity of 17 gal (64 L) per

minute. Top of standpipe must be at least

39 in (99 cm) above floor and no higher than

96 in (2.4 m) from bottom of washer.

Siphon break: Must be purchased sepa-

rately. See chart below.

Floor drain system: Requires a siphon

break, see chart below. A minimum carry-

away capacity of 17 gal (64 L) per minute is

required.

If you have: You will need to buy:

Laundry tub or standpipe Sump pump system

taller than 96 in (2.4 m) (if not already available)

1 in (2.5 cm) diameter standpipe 2 in (5 cm) diameter to 1 in (2.5 cm)

diameter standpipe adapter,

Part No. 3363920

Overhead sewer Standard 20 gal (99 cm), 39 in (99 cm)

tall drain tub or utility sink and sump

pump (available from local plumbing

suppliers)

Floor drain Siphon break, Part No. 285320;

additional drain hose, Part No. 3357090:

and Connector Kit, Part No. 285442

Parts listed are available from your local Sears store or Sears Service Center. In the United

States, call 1-800-366-PART (1-800-366-7278). In Canada, call 1-877-533-6937.