Owner`s manual

SETTING YOUR CYCLE
SELECTOR (TIMER) CONTROL
• For sturdy or heavily soiled loads, use
SUPER.
• For moderately soiled loads, use
REGULAR.
• For delicate or lightly soiled loads, use
SHORT.
HEAVY DUTY
Use this cycle to get up to 14 minutes of
wash time. Wash combines fast speed
agitation and fast spin speeds.
PERMANENT PRESS
The PERMANENT PRESS cycle includes
a load cooling process that reduces
wrinkling compared to other cycles.
Use this cycle to get up to 10 minutes of
wash time. Wash combines fast speed
agitation and fast spin speeds.
NOTE: When the timer reaches PAUSE,
the washer will drain and pause for no
more than two minutes while some of
the wash water is replaced with rinse
water.
SHORF
COLD/COLD
HEAVY DUTY
REGULAR 12
WARM/COLD I_
SUPER 14
NOT/COLD OFF
RINSE
RINSE AND SPIN
When using extra detergent for heavily
soiled clothes, or washing special-care
items, you may find an extra rinse and
spin is needed.
STEP 1. Set WATER LEVEL Control.
STEP 2. Set the Cycle Selector Control
(Timer) knob to the RINSE setting.
STEP 3. Pull Cycle Selector Control
(Timer) knob out to start washer.
SE
t=="
SHORT
COLD/COLO
_u_E
cool _w_
SPIN ONLY
A drain and spin may help shorten drying
times for some heavy fabrics or special-
care items by removing excess water,
STEP 1. Set the Cycle Selector Control
(Timer) knob to the SPIN setting,
STEP 2. Pull the Cycle Selector Control
(Timer) knob out to start washer.
24