Installation & Assembly

CHARGING INSTRUCTIONS:
1. Place the charging induction plate in a dry, indoor location - DO NOT operate or leave the charging induction plate
outdoors
2. Connect the plug to an electrical wall outlet with an input voltage of AC 100V-240V
3. Place the LED lamp directly on top of the charging induction plate so that there is a secure fit - you should see a red (for
charging) or blue light (fully charged) omitted from the LED lamp. If you do not see any light omitting from the LED lamp,
check your electrical wall outlet is working and the LED lamp is correctly placed directly on top of the charging induction
plate
4. The indicator light will turn blue once the LED lamp is fully charged
LED LAMP OPERATING INSTRUCTIONS:
1. Place the LED lamp directly into the top of the lamp (once the lamp is fully assembled)
2. To turn on the LED lamp, turn it over and push the circular rubber button on the base of the LED lamp (this will turn the
LED lamp on or off)
3. The LED lamp will operate continuously for at least 6.5 hours.
4. Recharging time is approximately 6 hours.
5. After approximately 800 charges the LED Lamp will lose 20% of its ability to fully hold a charge.
TECHNICAL SPECIFICATIONS
Adapter Input: AC 100V-240V 50/60Hz.
Charging Plate Input: DC7.5V
Operating Current: 1A
INDA ASSEMBLY INSTRUCTIONS 150129V1LAR