User`s manual

Handle Motion

The handle can be moved in any direction or rotated left or right.

When released the stick will always snap back to center and put the

engine in neutral idle.

Moving the handle away from center or rotating it will cause the

engines to shift into the correct gear for the desired motion. Further

handle motion in the same direction will apply throttle and provide

more thrust in the chosen direction. The joystick is proportional and

guided in each axis.

Boost Button

Increases the power the engines can apply and may be turned on or

off at any time. It can be very handy when handling the boat in wind

or current. The system will remember the boost mode status so if it

is left on, it will be on again next time the joystick is activated.

Take Command Button

Activates the joystick and allows the joystick to take control of the

vessel. The joystick can only take control of the boat when the

control head levers are both in the neutral idle position.

A and C Buttons

Reserved for future use. Not active at this time.

6.1 Joystick Fundamentals