User`s manual

© 2012 Teleflex Marine, Inc. Optimus 360 Users Manual, Rev. A
52
10.2.1 Danger Fault Handling
A danger fault is a critical system fault which will result in limited
steering and/or shift and throttle performance and requires
immediate action.
During a danger fault, the CANtrak display will display DANGER
across the top, sound a continuous buzzer (until muted) and display
fault information and handling in three zones. See the figure below.
10.2 System Fault Handling
In case of a Danger or Warning message, the CANtrak display will
advise the operator how to proceed. If the danger or warning is
caused by the control system the control head lights will flash red.
The following sections describe what to expect in case of either
fault.
Will appear if multiple
faults are active to allow
user to scroll through
Active Fault Description Zone
Provides details specific to the system fault. These will include a
brief description of the fault and are primarily for troubleshooting
purposes.
System Status Zone
Displays information about the status of the system and if the
system has automatically reacted to the fault.
Fault Handling Instructions Zone
Provides detailed instructions on how to proceed. In the case of a
danger fault, this will instruct the operator what to do and how to
proceed should Limp Home mode be required.
Active Fault
Description Zone
Fault Handling
Instructions Zone
System Status Zone