User`s manual

© 2012 Teleflex Marine, Inc. Optimus 360 Users Manual, Rev. A
54
10.2.2 Limp Home (continued)
Limp Home Mode 2
This mode occurs when the system can no longer provide steering to
ONE of the engines. The CANtrak will instruct the operator to realign
the non-responsive engine, tilt it out of the water and proceed home
immediately using the responsive engine as shown in the figure
below.
Limp Home Mode 3
This mode occurs when the shift and/or throttle is compromised on
both engines. The CANtrak will instruct the operator to use the shift
and/or throttle manual overrides. If only one engine’s shift and/or
throttle is compromised, Limp Home Mode 3 may not be required
and the CANtrak will instruct the operator how to proceed.