User`s manual

© 2012 Teleflex Marine, Inc. Optimus 360 Users Manual, Rev. A
56
10.2.3 Warning Fault Handling
A warning is a non-critical system fault which will either maintain full
system operation or may cause the steering and/or boat speed to be
reduced.
During a warning fault, the CANtrak will display the same information
as with a danger fault but WARNING will appear across the top of the
screen and the buzzer will sound intermittently (until muted). See the
figure below.
Will appear if multiple
faults are active to allow
user to scroll through
User may exit the
Warning screen and
return to run screen
The user may choose to exit the Warning screen and return to the All
Helms Active screen by pressing the exit button, in which case the
system will flash a warning icon on the run screen as shown on the
next page. This icon will remain in place until the fault is repaired. If
the system recovers from the fault, for example if a battery runs low
and is subsequently charged, the warning screen will disappear and
the system will automatically resume normal operation.
Active Fault
Description Zone
Fault Handling
Instructions Zone
System Status Zone