User`s manual

© 2012 Teleflex Marine, Inc. Optimus 360 Users Manual, Rev. A
60
10.3 Buzzer
10.4 Reduced Performance
The buzzer is used to indicate a system fault. There are two different
signals:
1.
Continuously on. This indicates a danger fault. A danger fault is
a critical system fault which will result in limited steering and/or
shift and throttle performance and requires immediate action and
immediate return to the nearest port. See Section 10.1.1.
2. Alternating on and off. This indicates a warning fault. A warning is
a non-critical system fault which will either maintain full steering
system operation or cause the steering and/or boat speed to be
reduced. See Section 10.1.2.
All signals require immediate attention.
When the buzzer sounds, a screen will appear on the CANtrak
indicating the cause for the alarm. The screen will also display a
“mute” button which may be used to silence the alarm.
Under certain fault conditions the steering response and/or boat
speed will slow down. A typical cause might be a very low battery.
When this happens the CANtrak will advise the operator of the
condition, indicate the reason, and supply instructions.
Proceed with caution until the fault is corrected and normal
operation returns.