User`s manual

67
© 2012 Teleflex Marine, Inc. Optimus 360 Users Manual, Rev. A
B APPENDIX
EST Station Select Protection
Station Select Protection prevents accidental switching between
control stations on multi-stationed boats. If turned on, a change of
control stations requires that control head buttons be pressed in a
specific sequence.
Operation
If Station Select Protection is turned on, to select or change stations
use the following button sequence:
•
Go to the station you wish to make active
•
Press the Take Command button
•
Press the Take Command button again
•
Press the Neutral or ‘N’ button
•
Press the Take Command button
•
The station will go active (blue light on solid) if the handles are
matched with the originally active station.
•
If the blue light flashes, match the handles with the originally
active station and the blue light will go solid.
Until the blue light is on solid, the original active station retains
control of the boat.
WARNING
On multiple helm station boats, all steering helms are active when
the Optimus EPS is turned on. This is the same you would find on a
conventional hydraulic steering system. Station Select only applies
to the control head.