Installation Guide

ManualsBrandsSeaSun ManualsOtherSurfside Premium PVC Fabric Exterior Roller Shade Cord Operated with Protective Valance - 96 in. W x 96 in. L

Solar Shade (with Valance)

Bottom Tube Plug

(BTP09)

Valance (VA10)

Bottom Tube (BT09)

Shade Cloth (SC)

Valance Bracket

(VB09)

Right Valance Cover

(RVC09)

Cord Safety Device

(CSD17)

Note: some parts may be slightly different than shown in this manual. We recommend two (2) people install this shade.

Bungee System

(BUN09)

Part # Description Qty Location

VA10 Valance 1 Pre-installed

SC Shade Cloth 1 Pre-installed

BT09 Bottom Tube 1 Pre-installed

LVC09 Left Valance Cover 1 Pre-installed

RVC09 Right Valance Cover 1 Pre-installed

PB10 Plug Bracket 1 Pre-installed

P10 Plug with Pin 1 Pre-installed

C10 Clutch (with cord) 1 Pre-installed

CB10 Clutch Bracket 1 Pre-installed

CSD17 Cord Safety Device 1 Pre-installed

BTP09 Bottom Tube Plug 2 Pre-installed

VB09 Valance Bracket 2-3 In hardware box

S09 Screw 8 In hardware box

CSDS17 Cord Safety Device Screw 2 In hardward box

BUN09 Bungee System 2 In hardware box

Clutch Bracket

(CB10)

Clutch (w/ cord)

(C10)

Plug (with pin)

(P10)

Plug Bracket

(PB10)

Left Valance Cover

(LVC09)

(Exploded view)

Screw

(S09)

Cord Safety Device

Screw (CSDS17)

Summary of content (4 pages)

PAGE 1
Solar Shade (with Valance) Valance (VA10) Shade Cloth (SC) Bottom Tube (BT09) Right Valance Cover (RVC09) Clutch Bracket (CB10) Left Valance Cover (LVC09) Plug Bracket (PB10) Clutch (w/ cord) (C10) Plug (with pin) (P10) (Exploded view) (Exploded view) Screw (S09) Bottom Tube Plug (BTP09) Cord Safety Device Screw (CSDS17) Part # VA10 SC BT09 LVC09 RVC09 PB10 P10 C10 CB10 CSD17 BTP09 VB09 S09 CSDS17 BUN09 Cord Safety Device (CSD17) Valance Bracket (VB09) Description Valance Shade Cloth Bottom Tube
PAGE 2
BEFORE YOU START WALL INSTALLATION CEILING INSTALLATION Determine your type of installation. Your solar shade can be hung from a wall or a ceiling. See Figures A and B. Your shade is shipped with a protective film to prevent scratching during shipping. Remove this film prior to installation. Fig B Fig A Step 1: Install the Valance Brackets Your shade includes a paper template. Use of the template is optional, but recommended.
PAGE 3
Step 2: Install the shade For wall installations, first hook the back of the Valance on the top of Valance Brackets (Fig G), then rotate the shade down and click into place (Fig H). WALL INSTALLATION Note: you may need to push the plastic tabs on the Valance Brackets to help the shade click into place. Fig H Fig G CEILING INSTALLATION For ceiling installations, first hook the back of the Valance on the back of the Valance Brackets (Fig I), then rotate the Valance upwards and click it into place (Fig J).
PAGE 4
Switching Cord to the Left Side of the Shade 1. Place your shade on the floor, with the front of the Valance towards you. 2. Remove both Valance Covers (RVC09 and LVC09). When removing the Valance Covers, use a blunt object to help remove the covers. After you have removed the Valance Covers, switch their positions (move the left cover to the right side of the shade, and move the right cover to the left side of the shade). 3.