Installation Guide

Step 2: Install the shade
For wall installations, rst hook the back of
the Valance on the top of Valance Brackets
(Fig H), then rotate the shade down and
click into place (Fig I).
Note: you may need to push the plastic tabs
on the Valance Brackets to help the shade
click into place.
Fig H Fig I
Wall Installation
Ceiling Installation
For ceiling installations, rst hook the back
of the Valance on the back of the Valance
Brackets (Fig J), then rotate the Valance
upwards and click it into place (Fig K).
Note: you may need to push the plastic tabs
on the Valance Brackets to help the shade
click into place.
Fig J Fig K
Step 3: Assemble Pole
To assemble your pole, slide the Pole-Mid
Piece onto the Pole-Long Piece, making sure
the holes are pointing towards the handle
(see Fig L). en slide the Pole-Handle
Piece into the Pole-Mid Piece.
Place the Pole Lock Washers onto the Pole
Screws. Note: the Washers may already be
on the screws. Insert the Pole Screws into
the Pole-Mid Piece. Tighten with phillips
head screw driver. Note: Not all of the Pole-
Long Piece is shown in Fig L.
To use the pole simply place the hook into
the ring on the Crank Bracket, and turn the
Pole-Handle Piece.
Fig L
Pole-Mid Piece (PMP12)
Pole-Long Piece (PLP12)
Pole-Handle Piece (PHP12)