Owner`s manual

14 Audio mode
Status Result
Radio mode with ... displayed in
the centre line of the screen
⇒ fig. 4.
Switches to the next available station
on the current frequency band.
Radio mode with ... displayed in
the bottom line of the screen
⇒ fig. 5.
Switches to the next stored station
⇒ page 15.
Radio mode with ... displayed in
the centre line of the screen and TP
indication.
Switches to the next available TP traf-
fic news station ⇒ page 17.
Tuning to a station frequency manually
● Select the desired frequency band
⇒
page 12.
● Turn the setting knob
⇒
fig. 1
8
until the desired station frequency
(e.g. 89.9 MHz) is displayed on the screen.

Scan function (SCN)
Fig. 6 MENU display
with additional func-
tions in Radio mode:
Scan function (SCN),
Autostore (AS) and
Setup (SET).
Starting and stopping the scan function
● Select the desired frequency band in Radio mode ⇒ page 12.
● Press the setting knob ⇒ fig. 1
8
to start the scan function.
● ALTERNATIVELY: press the
MENU
unit button and start the scan function
with the
SCN
function button ⇒ fig. 6.
The scan function commences with the following available station. All avail-
able stations in the selected frequency band will play for approximately 10
seconds. The screen displays the additional functions for Radio mode and
the
SCN
button is underlined.
● Press the setting knob
8
or the underlined
SCN
function button to stop
the scan function of the tuned station.
Special case: SEEK MODE

PRESET

after the scan function has finished
Even if the setting for changing stations is the selection of stored stations
only (SEEK MODE

PRESET

⇒
fig. 26), after the scan function stops, initially
all available stations will play by
⇒
fig. 4 pressing the arrow buttons.
Activation of the stored stations only with the arrow buttons is only possi-
ble after switching to a station using a station button
⇒
fig. 5.
