Owner`s manual

15Audio mode
Memory levels and displaying of station buttons
Fig. 7 Select the fre-
quency band and
memory level.
Fig. 8 Stations but-
tons for the FM1 mem-
ory level.
Each frequency band (
FM and AM) has two memory levels (FM1, FM2 and
AM1, AM2) each with six station buttons.
Changing memory level
●
In Radio mode briefly press the
RADIO
⇒
fig. 1 unit button and it will
show the frequency bands and memory levels available for approximately
five seconds
⇒
fig. 7.
●
Press the
RADIO
unit button once again to change to the next memory
level, for example
FM2
⇒
fig. 7.
●
ALTERNATIVELY: Activate the frequency band and the memory level by
pressing a function button (
FM2
,
AM1
or
AM2
).
After roughly five seconds the station buttons will be visible ⇒ fig. 8.
Station buttons
1
to
6
Station buttons
7
to
12
Station buttons
1
to
6
Station buttons
7
to
12
You can assign stations to each station button of a memory level either
manually or automatically ⇒ page 15.

Storing stations on the station buttons
Fig. 9 Station stored
to station button 2 in
the FM1 memory level.
Fig. 10 MENU display
with additional func-
tions in Radio mode:
Scan function (SCN),
Autostore (AS) and
Setup (SET).

FM1:
FM2:
AM1:
AM2: