Owner`s manual

26 Audio mode
The AUX-IN multimedia socket should be activated in the system setting
⇒ page 30 in order for it to appear in the Media selection menu ⇒ fig. 17.
Connecting an external audio source to the AUX IN multimedia socket
● Lower the basic volume of the radio.
● Connect an external audio source to the AUX-IN multimedia socket.
● Begin playback of an external audio source.
● In media mode, briefly press the
MEDIA
⇒ fig. 1 unit button to display
the selection menu for available media sources ⇒ fig. 17.
● Press the
AUX
function button.
The output volume of a connected external audio source should be adjusted
to that of the other audio sources.
Adjusting the output volume
If you need to increase the output volume for the external audio source, first
lower the base volume on the radio.
If you need to increase the output volume for the external audio source, first
lower the base volume on the radio system
⇒
page 11.
If the sound from the external audio source is too quiet, if possible, in-
crease the output volume on the external audio source. If this is not suffi-
cient, set the input volume (AUX VOL LEVEL) in the unit settings to level 2 or
level 3.
If the sound from the connected external audio source is too loud or distor-
ted, if possible, lower the output volume on the external audio source. If
this is not sufficient, set AUX VOL LEVEL to level 2 or level 1.
Note
If playback of the external audio source finishes or if the connector of the
AUX-IN multimedia socket is unplugged, the radio will remain in the AUX
menu.
Note
Interference noise may be heard if the external audio source is powered
from the vehicle's 12-volt power socket.
Note
Please read and observe the external audio source manufacturer operating
manual.
