Owner`s manual

30 Settings menu
System and function settings (SETUP)
Introduction
Additional information and warnings:
● Safety notes

⇒ page 6
●
Unit overview
⇒ page 8
● Basic information on use ⇒ page 10

Modifying the settings
Fig. 25 Additional ra-
dio functions
Fig. 26 SETUP menu:
defining station selec-
tion using arrow but-
tons.
Displaying settings menus and changing settings
● Press the
MENU
unit button in radio or media mode ⇒ fig. 1.
● Press the
SET
⇒ fig. 25 unit button to open the SETUP menu ⇒ fig. 26.
● Pressing one of the function buttons displays the corresponding set-
tings menu.
● Turn the setting knob ⇒ fig. 1
8
to change the displayed setting.
● Changes are applied automatically.
● Press the
MENU
unit button to close the SETUP menu.
While you adjust volume settings, the currently active audio source is
played at the level of the setting as you change it.
Overview of available settings menus
Depending on the country, the system and the vehicle equipment, there
may be differences in the variety of settings.
Function button: Result
SKM
SEEK MODE: Regulate the operation of the arrow buttons

⇒ fig. 1
10
and

to change the station in radio mode ⇒ page 12.
ALL
: The arrow buttons allow you to browse through all available sta-
tions (Display:

.

to the left and right of the selected station
⇒ fig. 4).
PRESET
: The arrow buttons allow you to browse through only the sta-
tions stored to presets in the selected frequency band (Display:

.

to
the left and right of the station buttons ⇒ fig. 5).
RDS
a)
: It is possible to switch off RDS-dependent services for travel in
areas where there is no RDS coverage (automatic station tracking, traffic
news TP) ⇒ page 12.
ON: RDS is switched on.
OFF: RDS is deactivated and the
AF
function button is no longer
available in the SETUP menu.
AV
a)
HIGH FREQ.: Define the setting for automatic station tracking
⇒ page 12. 