User's Guide

9
bottom.
Once you have identified your install location, assemble the u-bolt, bracket,
nuts and washers onto a pole or pipe as shown in the illustration. Keep the
connections loose enough to allow the antenna to rotate until the optimum
direction is found.
Once the outside antenna is secured to a pipe or pole, Connect antenna to
cable connector for the outdoor cable provided with your kit and run along
route to planned location of your booster.
Installation steps
(1) Fix the outdoor antenna on a long rod and tighten the screws.
(2) Let the outdoor antenna point to the direction of the base station.
Option A:
Log Periodic Antenna