User's Manual

The Correlator
35
4.4 Basics of operation
4.4.1 Input methods
Entries can be made directly on the screen or via the rotary encoder.
2 ways of entering data
Touch display Rotary encoder
The correlator screen is touch-sensitive.
All entries can be made directly on the
screen.
The correlator has a rotary encoder.
All entries can be made using the rotary
encoder.
The buttons or fields displayed can be
called or executed by tapping with your
finger.
Turn the rotary encoder to navigate
through the displayed buttons.
Press the encoder to call the selected
button (ENTER function).
You can always switch between operating via touch screen and operating via rotary
encoder.
4.4.2 Entering identification numbers (IDs)
Various functions require the identification numbers (IDs) of the Power transmitters or
Multi sensors to be specified.
The ID is deduced from the last six digits of the device's serial number (short: SN). You
find the serial number on the nameplate of the device.
Example:
Serial number (SN):
0888000225
Identification number (ID):
000225
Entry on correlator / PC:
225
You can enter device IDs manually or you can use the "Automatic device detection".
Automatic detection means that, when a device is activated its ID is sent to the
Correlator. There, it is detected and displayed.
Introduction