User's Manual

"Map" function
63
9 "Map" function
The Map function is a very clear and comfortable way to work with Offline Measurement
data.
In the Map menu, the existing pipe network can be reproduced on the screen. The
sensors used are shown as icons. Pipelines can be drawn between these icons and the
pipe parameters can be specified.
As soon as the network is drawn, the correlation of every possible sensor pair can be
started and displayed.
To access the Map menu, proceed as follows:
Step Description
1
In the main menu, tap the button .
2 In the displayed menu, tap the Map button.
Result: The following menu is opened.
The square boxes represent the Multi sensors (1 to 8) or Power transmitters
(A + B) used in the measurement. The icons can be arranged realistically to each
other by hand or, if the GPS coordinates of the measuring points have been
determined and stored with the Correlator, at the touch of a button.
The sensor icons can be moved and repositioned on the screen. (Only possible via
touch screen, not possible via rotary encoder).
Proceed as follows:
Step Description
1 Tap the Move button.
2
Tap and move the sensor icons on the screen.
If GPS coordinates of the measuring points have been stored, you can use the
GPS button to arrange the sensor icons automatically.
3 Conclude with OK.
Access the Map
Arrange sensor icons