User's Manual

GPS position data
75
11.3 Distance measurement and navigation via GPS
You can use the GPS function of the Correlator to determine the distance between two
points. You can also use the function as a guide to find a stored measuring point.
To open the GPS menu, proceed as follows:
Step Description
1
In the main menu, tap the button .
2 In the displayed menu, tap the Tools button.
3 In the displayed menu, tap the Distance measurement / Navigation button.
The menu is structured as follows:
Element Description
Current position
Indicates the current position of the Correlator. Once the Correlator is moved,
the displayed value is adapted.
Distance
Indicates the linear distance between the Current position and the Target
position.
Target position
Indicates the GPS position of the point, which was defined as Target position.
Sensor list
List of all sensors, i.e. measuring points, whose GPS coordinates have been
determined and stored. One of these sensor installation points can be
selected and specified as Target position.
top down:
Positioning accuracy for the Correlator position (in percent).
Number of available GPS satellites.
The current GPS date and GPS time.
Speed at which the Correlator is currently moved.
Access the menu