User's Manual

GPS position data
76
You can calculate the distance from your current position to a stored measuring point.
In the drop-down list , select the sensor which is installed at the relevant measuring
point.
The GPS coordinates of the measuring point are adopted and displayed as the new
Target position. The distance information is updated and displays the distance between
the Correlator and the measuring point.
You can calculate the distance from your current position to any other location.
Proceed as follows:
Step Description
1
In the drop-down list , select Current position.
2 Tap the Set button.
Result: The GPS coordinates of your current location are adopted and displayed
as the new Target position.
3
Take the Correlator and proceed to the desired other location.
Result: The distance information is permanently updated and displays the
distance from your current location to the Target position.
You can use the directional sign of the GPS menu to guide you to a measuring point.
Proceed as follows:
Step Description
1
In the drop-down list , select the sensor which is installed at the relevant
measuring point.
Result: The GPS coordinates of the measuring point are adopted and displayed
as the new Target position.
2
Go into the direction the compass needle shows.
The target location is reached when the "Current position" coordinates match the
"Target position" coordinates.
The direction specified by the compass needle is reliable, as long as you
are in motion, but once you stand still at a place, the needle begins to
rotate and the direction shown is no longer reliable.
Distance
from here to
a measuring point
Distance
from here to
any location
Navigating
to a location