User's Manual

Technical description
11
Recorded measuring data are stored in the loggers memory and can be retrieved via
short range radio. Loggers equipped with a GSM module can also send the data
regularely to an FTP server, from where they can be downloaded to any Internet-
capable computer.
Programming of the device, as well as retrieving and evaluating the recorded measuring
data is performed by the help of the ‘SebaDataView-3’ PC software.
2.3 Communication
The SebaDataView-3 software is used on a PC/laptop to program the logger before the
measurement and to retrieve the collected data after the measurement.
Short range radio is used for communication between the devices. The computer must
have a radio interface. For that purpose the ‘Log RI’ / "Log RI+"or the ‘Reader-3’ from
SebaKMT can be connected.
Furthermore, if your logger is equipped with an internal GSM module, measurement
data uploads to an FTP server or configuration data downloads to the logger are
possible.
Loggers, which are to be contacted via radio, have to be switched on and must
be situated within the wireless range of the computer or reading device.
GSM / GPRS
Internet
Funk
Externes GIS oder
SCADA-System
PC-Software SDV-3