User's Manual

Technical description
12
2.3.1 Log RI or Log RI+ radio interface
The compact ‘Log RI’ is the standard radio interface for communicating with devices of
the Sebalog series.
The radio interface ‘Log RI+’ is available as accessory from SebaKMT. Compared to the
Log RI the device has a higher-performing radio module which allows a higher radio
range.
Simply connect the ‘Log RI’ / ‘Log RI+’ to a USB port of the computer. The device
switches itself on. The device is automatically detected by the computer and
immediately ready to establish the radio link. There are no further adjustments to be
done.
The device has a status LED:
• flashing 1x red, 1x green … switching on
• blue light … data transfer in progress
• red light … malfunction
We recommend that the device is always operated with the latest firmware. More exact
information on how to update the firmware in Sebalog N-3 series devices is available in
its own section in this operating manual (see page 40).
2.3.2 Reader-3 used as radio interface
The ‘Reader-3’ reading device from SebaKMT can be used to establish radio
communication, too.
Connect the Reader-3 to the USB port of your PC using the Docking Station and switch
it on. The device automatically starts in USB mode. It is automatically detected by the
computer and immediately ready to establish the radio link. There are no further
adjustments to be done. For further information please consult the operating instructions
of your Reader-3.
‘Log RI’
'Log RI+'
Use
Status LED
Update