User's Manual

SebaDataView-3 software
33
5.3.4 Adding / deleting single devices
To add a device to a group in the directory tree, e.g. a logger, proceed as follows:
Step Description
1
Mark the group in the directory tree to which the device should be added.
2 In the multifunction bar, open the tab LogD3.
3 In the segment Administration, click on New.
4
In the window which opens, enter the Identification Number (ID) of the device or
use the "Automatic detection" (find more information below in the text).
Click on OK to add the device to the group.
Result: The new device has now been created in the database and will appear in
the directory tree.
Add more devices to the group successively or close the window.
There is the possibility to add devices of different types to the same group. Then,
automatically new sub-directories are created by the software to which the
various devices are added according to their type.
Example: "Group I" has LogDX, Log P and Log N3 loggers:
A radio interface (e.g. Log RI) needs to be connected to the computer in order to be able
to use the „Automatic detection“ when signing on devices.
Tick the checkbox „Automatic detection“ in the window which opens. Then bring the
device which has to be turned off near the computer and switch it on. The identification
number of the device will be recognised and displayed on the screen.
Click OK or Insert in order to accept the ID and to add the device to the group.
If you tick the checkbox „Automatic insertion“, the recognised devices will be added
automatically to the group.
Add a device
Automatic detection