User's Manual

Retrieving and evaluating data
64
Function Description
Insert label
You can use this function to create text fields (labels) within the
diagram. These fields can be used to add comments to any points in
the diagram. Labels remain saved after the diagram display is closed.
Edit text … Double-click the text field – input text – then click
once outside of the field
Move label … Click the text field once – then “grab onto it” (click it
and hold down the left mouse button) and move it
wherever you would like
Delete label … Click the text field once – then press the “Delete”
key on your keyboard
Hide / Show
grid
You can use this option to decide whether there should be a grid shown
in the bottom diagram’s background or not.
If you want to print the actual diagram view, right-click in the bottom diagram and select
Print from the appearing context menu.
If you want to cancel all active functions in the window and return to the initial diagram
view, right-click in the bottom diagram and select Reset from the appearing context
menu.
7.4.3 Displaying pressure surges
If pressure surges were recorded in addition to the standard pressure measurement,
you will see a drop-down list at the very top of the displayed window. All recorded
pressure surges are in this list.
In order to display the one-minute recording of an individual pressure fluctuation, click
the desired recording time point in this list. The corresponding measurement curve will
be displayed in the bottom diagram.
With the tools described above, you can view the recording in detail and carry out a
closer analysis.
To return to the standard measurement display, click Overview in the drop-down list.
Print
Reset initial view