User's Manual Part 1

The Commander
26
4.8.1 Basic settings
The following basic settings can be made in both Professional mode and Easy mode:
Line Description
User mode
Select a user mode for the device (see page 26).
Language
Select a language for the user interface.
If you cannot read the preset language, you can go to
the language selection - starting from the main menu -
via the following symbols:
 
Time and date
settings
In the Timezone line, select the timezone for where you are.
In the Daylight saving time line select whether it is currently
winter or summer time.
In the Date format line, select the date format to be used by the
Commander.
DD … Day
MM … Month
YYYY … Year
In the Time line, enter the current time for the Commander
(hour:minutes:seconds).
In the Date line, enter the current date for the Commander
(day:month:year).
Backlight switch off
Select a period of time for the backlight until it is switched off
automatically (never = continuous backlight).
Turn off autom.
after
Select a period of time for the auto-off function.
If no entry is made for longer the specified time, the Commander
switches off automatically (never = automatic switch off
deactivated).
Keybeep
Activate/deactivate the key tone that sounds when the selector
knob is pressed.
History
Activate/deactivate the “History” function.
If the “History” function is activated, the measured data from
loggers remains stored in the Commander after they are read
out. They can then be called up at any time and displayed again.
If the function is deactivated, the previous data set is overwritten
when new data is read. Deactivating the function can be useful
because this saves memory space and the Commander can
work faster in certain situations.