User's Manual

Working in Professional mode

You can rename an existing logger group.

First select the particular group in the list and then select the Rename button. In the

following screen views, enter a group mode (see page 13) and the new name of the

group.

The group then appears with the new name in the group list.

You can copy an existing logger group, with all its loggers, within the list and allocate a

new name and new group mode to this copy. (This can be useful if, for example, you

wish to use the loggers of an existing “Lift&Shift” group for the next measuring

assignment, but would like to read out data by “Patrolling”.) The new group

automatically adopts the configuration data of the original group but contains no

measured data at all.

First select the particular group in the list and then select the Copy button. In the

following screen views, enter the group mode (see page 13) and the name of the new

group.

The new group then appears in the group list. If needed, more new loggers can now be

allocated to it (see page 47).

You can delete a logger group from the Commander.

First select the particular group in the list. Then select the Delete button and answer the

confirmation query with Yes.

If the loggers in this group are not contained in any other existing groups, deleting

simultaneously de-registers them from the Commander. The measured data of the

group is retained in the history as long as the “History” function is active (see page 26).

Otherwise the data will be lost.

Renaming a group

Copying a group

Deleting a group