User's Manual

Working in Easy mode
31
5 Working in Easy mode
5.1 Starting up the Commander
5.1.1 Switching on the Commander
Switch on the Commander by pressing the I/O button .
The Easy mode main menu appears on the screen:
In Easy mode, the symbol is continuously shown at the bottom of the screen. If
you do not see this symbol, the Commander is in Professional mode. To switch to Easy
mode, open the system settings menu. Starting from the start screen, follow the
 symbols and, in the first line of the menu, select the “Easy mode” setting
from the list.
The screen might not be displaying the correct language. The language can be changed
in the system settings menu. Beginning at the start screen, follow the
  symbols and select your language from the list.
5.1.2 Checking the basic settings
Before a measuring session, check that the Commander’s system settings are up-to-
date and correct (see page 26). The date and time settings in particular must be correct.
Beginning at the start screen, follow the  symbols to open the system
settings menu.
Changing the
user mode
Changing the language
Name of the
workgroup
System date