User's Manual

PS-3 - Basics
12
2.3 Connections
USB port
Connects to a USB data storage device.
Connection for the radio module LOG RI+
Connection for charger
2.4 Type plate
Identification number (ID)
Access to PocketServer WLAN
SSID: Name of WLAN
PW: Password for WLAN
Type designation
The last three digits correspond to the radio frequency of the device (here: 868 MHz).
2.5 Switching on/off
To switch on the PocketServer, briefly press the I/O button on the device. The blue and
one green LED light up.
The device takes some time to start up the internal processor. During this time, the blue
LED flashes at short intervals.
Do not interrupt the power-on procedure!
At the end of the process, the blue LED flashes three times at long intervals and then
goes out.
The device is now ready for operation. The PocketServer WLAN network is established
and available. The green LED bar indicates the battery status of the PocketServer.
Switching on