User's Manual

PS-3 - Basics
13
There are two ways to turn off the PocketServer.
Option 1: in the user interface
► Tap these keys one after the other:
Option 2: with the I/O button on the PocketServer
► Press the I/O button on the unit for about two seconds. Release the button as soon as
the green LEDs go out.
The device takes some time to shut down the internal processor. During this time, a
single green LED is on.
Do not interrupt the power-off procedure!
Once the green LED goes out, the device is switched off.
2.6 User interface
Four quick selection buttons can be found in the corners of the user interface.
Which of the following buttons are currently available depends on the active menu.
This button opens the start screen of the PocketServer.
This button opens the configurations of the PocketServer.
This button returns you to the previous screen.
This button refreshes the screen.
This button cancels the current operation.
This button opens the PocketServer help.
This button opens a list of frequently used options. The options that are available in the
list depend on the active menu.
In the start screen, select the device type with the large buttons.
Tap this button, when you want to communicate with LOG N-3 noise-loggers.
Tap this button when you want to communicate with LOG P-3 or LOG P-3 mini
pressure-loggers.
Tap this button when you want to communicate with LOG DX data-loggers or with
TDM 200 devices.
Tap this button when you want to communicate with LOG D-3 data-loggers with
SebaFlow devices or TDM 300 devices
Switching off
Quick selection buttons
The start screen